$TXT Created by                  DEVCRN.DOMAIN.EXT  (KIDS) on Monday, 09/09/19 at 10:39
=============================================================================
Run Date: OCT 16, 2019                     Designation: MPIF*1*71
Package : MPIF - MASTER PATIENT INDEX VISTA   Priority: Mandatory
Version : 1        SEQ #68                      Status: Released
                  Compliance Date: NOV 16, 2019
=============================================================================

Associated patches: (v)MPIF*1*61   <<= must be installed BEFORE `MPIF*1*71'
                    (v)DG*5.3*981  <<= must be installed BEFORE `MPIF*1*71'

Subject: MASTER VETERAN INDEX VISTA ENHANCEMENTS - EHRM SUPPORT

Category: 
  - Routine
  - Enhancement (Mandatory)

Description:
============

 NOTE: To prevent legacy systems ending up as Treating Facilities,
       RG* and MPIF* patches should NOT be installed on legacy 
       systems or the FORUM CLAIMS system (since it is NOT a
       Veterans Affair Medical Center (VAMC) VistA system).
  
 MPIF*1.0*61 and DG*5.3*981 are the required builds for patch
 MPIF*1.0*71.
    
 NOTE: Master Patient Index (MPI) 'EHRM (Electronic Health Record
       Modernization) SUPPORT' enhancements are being distributed
       in four VistA namespaces: DG, MPIF, RG and XU.
       The only build enforced requirement is that:
         - DG*5.3*981 be installed before MPIF*1.0*71.
       
       **Note: Patches RG*1.0*72 and XU*8.0*710 can be installed
               in any order as there are NO dependencies to these
               other patches.
       
       (Do NOT install MPIF*1.0*71 or RG*1.0*72 on legacy sites or
        on the FORUM CLAIMS system)
  
 NOTE: Legacy sites and the FORUM CLAIMS system can install just the
       DG*5.3*981 and XU*8.0*710 patches. MPIF*1.0*71 and RG*1.0*72
       should NOT be installed on legacy sites or on the FORUM CLAIMS
       system.   
  
 The following enhancement exported in this patch is needed to
 support the transition of sites to the EHRM (CERNER) application.  
  
 Enhancement
 To support EHRM during the creation of patients that have potential
 matching Department of Defense (DoD) records being returned for
 selection in Enterprise Registration, an additional entry labeled
 'selectedIdentifier' will be transmitted in the eXtensible Markup
 Language (XML) explicit 'ADD' message to MPI upon creation of the
 patient at the site. The 'selectedIdentifier' entry will contain
 one of the following values below to identify the existing record
 that was selected from Enterprise Registration if applicable:
  
    - "" 
         Null if no results returned or nothing selected from results.
    - "<EDIPI>^NI^200DOD^USDOD"
         (DoD's) Electronic Data Interchange Personal Identifier 
         (EDIPI) if a DoD record was selected from the results list.
    - "<ICN>^NI^200M^USVHA"
         Integration Control Number (ICN) if any other Non-DoD record
         was selected from the results list.
  
 NOTE: The identifier value will be determined/created in routine
       DPTLK7 and then added to the XML message for transmission to
       the MPI in routine MPIFXMLI.
  
       
 Patch Components
 ================
  
 Files & Fields Associated:
  
 File Name (Number)         Field Name (Number)  New/Modified/Deleted
 ------------------         -------------------  --------------------
 N/A  
  
 Forms Associated:
   
 Form Name             File #       New/Modified/Deleted
 ---------             ------       --------------------
 N/A
   
   
 Mail Groups Associated:
   
 Mail Group Name          New/Modified/Deleted
 ---------------          --------------------
 N/A
   
   
 Options Associated:
   
 Option Name            Type               New/Modified/Deleted
 -----------            ----               -------------------- 
 N/A
   
   
 Protocols Associated:
   
 Protocol Name       New/Modified/Deleted
 -------------       -------------------- 
 N/A
  
   
 Security Keys Associated:
   
 Security Key Name
 -----------------
 N/A
   
   
 Templates Associated:
   
 Template Name      Type      File Name (Number)  New/Modified/Deleted 
 -------------      ----      ------------------  --------------------
 N/A
   
  
 Remote Procedures Associated:
   
 Remote Procedure Name             New/Modified/Deleted
 ---------------------------       -------------------- 
 N/A
  
  
 Parameter Definitions Associated:
  
 Parameter Name                    New/Modified/Deleted
 ---------------------------       -------------------- 
 N/A 
  
  
 Additional Information:
   
 New Service Requests (NSRs)
 ----------------------------  
 N/A
   
   
 Patient Safety Issues (PSIs)
 -----------------------------
 N/A
  
  
 Defect Tracking System Ticket(s) & Overview
 -------------------------------------------
 N/A
  
  
 Test Sites:
 ----------
 Louisville KY VAMC
 Sheridan WY VAMC
   
   
 Patch Installation:
  
  
 Pre/Post Installation Overview
 ------------------------------
 There are no Pre/Post installation routine processes.    
   
   
 Pre-Installation Instructions
 ----------------------------- 
 This patch takes less than 2 minutes to install. This patch may be 
 installed with users on the system. 
  
 The following OPTIONs should be disabled during installation:
      Load/Edit Patient Data                      [DG LOAD PATIENT DATA]
      Register a Patient                          [DG REGISTER PATIENT]
      Preregister a Patient                       [DGPRE PRE-REGISTER OPTION]
      Electronic 10-10EZ Processing               [EAS EZ 1010EZ PROCESSING] 
      UPDATE BATCH JOB FOR HL7 v2.3               [VAFC BATCH UPDATE]
      MPI/PD Patient Admin Coordinator Menu       [RG ADMIN COORD MENU]
      Local/Missing ICN Resolution Background Job [MPIF LOC/MIS ICN RES]
  
 The HL7 incoming filers should be stopped.  Use the Monitor, Start, Stop
 Filers [HL FILER MONITOR] option on the Filer and Link Management Options
 [HL MENU FILER LINK MGT] menu on the HL7 Main Menu [HL MAIN MENU].
   
  
 Installation Instructions
 -------------------------
 1.  Choose the PackMan message containing this patch.
   
 2.  Choose the INSTALL/CHECK MESSAGE PackMan option.  
   
 3.  From the Kernel Installation and Distribution System Menu, select
     the Installation Menu.  From this menu, you may elect to use the
     following options. When prompted for the INSTALL enter the patch 
     number (i.e. MPIF*1.0*71):
   
     a.  Verify Checksums in Transport Global - This option will allow
         you to ensure the integrity of the routines that are in the
         transport global.
     b.  Print Transport Global - This option will allow you to view the
         components of the KIDS build.
     c.  Compare Transport Global to Current System - This option will
         allow you to view all changes that will be made when this patch
         is installed.  It compares all components of this patch, such as
         routines, DDs, templates, etc.
     d.  Backup a Transport Global - This option will create a backup
         message of any routines exported with this patch. It will not
         backup any other changes such as DDs or templates.
       
 4.  From the Installation Menu, select the Install Package(s) option and
     choose the patch to install.
   
 5.  If prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of
     Install? NO//', respond NO.
   
 6.  When prompted 'Want KIDS to INHIBIT LOGONs during the install? NO//',
     respond NO.
   
 7.  When prompted 'Want to DISABLE Scheduled Options, Menu Options, 
     and Protocols? YES// respond YES.  The following OPTIONS should be
     disabled during the installation.
      
     a. When prompted 'Enter options you wish to mark as 'Out Of Order':',
        select the following options:
     
          Option Name                    Menu Text                       
          -----------                    ---------
          [DG LOAD PATIENT DATA]         Load/Edit Patient Data
          [DG REGISTER PATIENT]          Register a Patient 
          [DGPRE PRE-REGISTER OPTION]    Preregister a Patient
          [EAS EZ 1010EZ PROCESSING]     Electronic 10-10EZ Processing
          [VAFC BATCH UPDATE]            UPDATE BATCH JOB FOR HL7 v2.3
          [RG ADMIN COORD MENU]          MPI/PD Patient Admin Coordinator
                                          Menu
          [MPIF LOC/MIS ICN RES]         Local/Missing ICN Resolution
                                          Background Job 
     
     b. When prompted 'Enter protocols you wish to mark as 'Out Of Order':
        press the Enter key.
  
     c. When prompted 'Delay Install (Minutes):  (0 - 60): 0//', respond 0.
  
  
 Post-Installation Instructions
 ------------------------------
 After patch installation has completed, restart the HL7 incoming filers.
 Use the Monitor, Start, Stop Filers [HL FILER MONITOR] option on the Filer
 and Link Management Options [HL MENU FILER LINK MGT] menu on the HL7 Main
 Menu [HL MAIN MENU].
   
 Back-Out Plan
 -------------
 The MPIF patch back-out procedure would consist of restoring the original
 routine using the back-up message created during the patch installation.
   
 If assistance is still required to back-out the patch please contact the
 National Service Desk (NSD) to log a help desk ticket so the development
 team can assist in the process.
  
      Note: This process should only be done with the concurrence and
            participation of the development team and the appropriate
            VA Site/Region personnel.

Routine Information:
====================
The second line of each of these routines now looks like:
 ;;1.0;MASTER PATIENT INDEX VISTA;**[Patch List]**;30 Apr 99;Build 2

The checksums below are new checksums, and
 can be checked with CHECK1^XTSUMBLD.

Routine Name: MPIFXMLI
    Before: B39708353   After: B41378999  **61,71**
 
Routine list of preceding patches: 61

=============================================================================
User Information:
Entered By  :                               Date Entered  : MAR 28, 2019
Completed By:                               Date Completed: OCT 16, 2019
Released By :                               Date Released : OCT 16, 2019
=============================================================================


Packman Mail Message:
=====================

$END TXT