$TXT Created by                    TSTVSR.DOMAIN.EXT  (KIDS) on Thursday, 07/30/20 at 10:36
=============================================================================
Run Date: AUG 20, 2020                     Designation: SD*5.3*762
Package : SD - SCHEDULING                     Priority: Mandatory
Version : 5.3       SEQ #614                    Status: Released
                  Compliance Date: SEP 09, 2020
=============================================================================

Associated patches: (v)SD*5.3*694  <<= must be installed BEFORE `SD*5.3*762'

Subject: UPDATE VS GUI VERSION FROM 1.7.0 TO 1.7.0.2

Category: 
  - Routine
  - Other

Description:
============

 **************************************************************************
 * IMPORTANT NOTE: To avoid disruption of service with the Tele Health    *
 * Management Platform (TMP) and Community Care Referrals and             *
 * Authorizations (CCR&A) applications, sites must first install          *
 * SD*5.3*754 (DATA CLEANUP, TMP APPT START/END TIMES FIX) and SD*5.3*764 *
 * (HSRM FIX FOR APPT START AND END TIMES) (TMP and CCR&A patches have no *
 * specific install sequence).  Followed by installation of the VS GUI    *
 * patches; SD*5.3*694 (CHANGES FOR VISTA SCHEDULING GUI 1.7.0) and       *
 * SD*5.3*762 (UPDATE VS GUI VERSION FROM 1.7.0 TO 1.7.0.2).              *
 *                                                                        *
 * Informational Patch SD*5.3*695 (CHANGES FOR VISTA SCHEDULING GUI 1.7.0)*
 * should be updated via the Mark a Non-Kids Patch as Complete VistA menu *
 * option.                                                                *
 **************************************************************************
  
 **************************************************************************
 *                             GUI UPDATE NOTICE                          *
 *----------------------------------------------------------------------- *
 * This patch must be installed immediately after the installation of     *
 * accompanying patches SD*5.3*694 and SD*5.3*695 so that users can       *
 * launch VS GUI 1.7.0.2 successfully.  The previous version of           *
 * VS GUI 1.6 will no longer work once this patch is installed.  The      *
 * previous version of the VS GUI must be uninstalled via the Control     *
 * Panel before installing GUI version 1.7.0.2.                           *
 **************************************************************************
  
 Summary: VS GUI Release 1.7.0 has been incremented to VS GUI Release 
 1.7.0.2. This patch updates the version number in the SDEC SETTINGS File 
 (#409.98) to match the GUI version. Post-install routine SDEC762P will be 
 run to update the GUI version.
  
 Background: During IOC Production testing of VS GUI Release 1.7.0 and
 VistA patch SD*5.3*694, the Omaha (OMA) and Fayetteville (FNC) test sites
 reported that some users were unable to launch the VS GUI application. 
 After root cause analysis, it was found that new application files in the
 "VA VistA Scheduler" folder did not have the 'Modify' permissions set. The
 absence of 'Modify' permissions in these files prevented the VS GUI from
 updating the application log and trace log files, which prevented the
 application from launching.
  
 The location of the application and trace log files has been changed 
 in VS GUI Release 1.7.0.2.  The location has been changed from 
 'C:ProgramData\VA VistA Scheduler' folder to the
 'C:\Users\[userid]\AppData\Local\VA VistA Scheduler' folder so that 
 the 'Modify' permissions are no longer required to access the storage 
 point.
  
 It was determined that the Personal Identity Verification (PIV) login
 method was not working correctly. The configuration file was updated to
 include the following lines:
  
   <add key="requestSecurityToken" 
   value="https://services.eauth.domain.ext:9301/STS/RequestSecurityToken"/>
  
 Patch Components
 ================
  
 Files & Fields Associated:
  
 File Name (#)                Field Name (#)           New/Modified/Deleted
 -------------                ---------------------    --------------------
 n/a
  
 Forms Associated:
  
 Form Name                File #                  New/Modified/Deleted
 ---------                ------                  --------------------
 n/a
  
 Mail Groups Associated:
  
 Mail Group Name                  New/Modified/Deleted
 ---------------                  --------------------
 n/a
  
 Options Associated:
  
 Option Name                    Type             New/Modified/Deleted
 -----------                    ----             --------------------
 n/a
  
 Protocols Associated:
  
 Protocol Name                     New/Modified/Deleted
 -------------                     --------------------
 n/a
  
 Security Keys Associated:
  
 Security Key Name
 -----------------
 n/a
  
 Templates Associated:
  
 Template Name      Type      File Name (#)         New/Modified/Deleted
 -------------      ----      ------------------    --------------------
 n/a
  
 Remote Procedures Associated:
  
 Remote Procedure Name       New/Modified/Deleted
 ---------------------       --------------------
 n/a
  
 Additional Information:
  
 New Service Requests (NSRs):
 -----------------------------
 n/a
  
 Patient Safety Issues (PSIs):
 ------------------------------
 n/a
  
 Defect Tracking Ticket(s) & Overviews:
 -------------------------------------
 n/a
  
 Test Sites:
 -----------
 Fayetteville, NC
 Martinsburg, WV
 Omaha, NE
  
 Software and Documentation Retrieval Instructions:
 -------------------------------------------------
 The software for this patch is being released in a PackMan message.
  
 Documentation describing the new functionality is included in this 
 release. Documentation can be found on the VA Software Documentation 
 Library (VDL) at: https://www.domain.ext/vdl/
  
 Documentation Title                 File Name                    FTP Mode
 -------------------------------------------------------------------------
 VistA Scheduling        VS_GUI_Release_1.7_and_1.7.0.2_DIBR.PDF   BINARY
  (DIBR = Deployment, Installation, Backout, and Rollback Guide)
 VistA Scheduling        VS_GUI_Release_1.7_Release_Notes.PDF      BINARY
  Release Notes
 VistA Scheduling        VS_GUI_Release_1.7.0.2_Release_Notes.PDF  BINARY
  Release Notes
 VistA Scheduling        VS_GUI_Release_1.7_and_1.7.0.2_           BINARY
  Technical Manual         Technical_Manual.PDF
 VistA Scheduling        VS_GUI_Release_1.7.0.1_User_Guide_        BINARY
  User Guide Addendum      Addendum.PDF
 VistA Scheduling        VS_GUI_Release_1.7.0.2_User_Guide_        BINARY
  User Guide Addendum      Addendum.PDF
 VistA Scheduling        VS_GUI_Release_1.7_and_1.7.0.2_VDD.PDF    BINARY
  (VDD = Version Description Document)
  
 Patch Installation:
  
 Pre/Post Installation Overview
 ------------------------------
 This patch may be installed with users on the system, although it is 
 recommended that it be installed during non-peak hours to minimize
 potential disruption to users.  This patch should take less than 5 minutes
 to install.
  
 Installation Instructions
 -------------------------
  
 1.  Choose the PackMan message containing this patch.
  
 2.  Choose the INSTALL/CHECK MESSAGE PackMan option.
  
 3.  From the Kernel Installation and Distribution System (KIDS) Menu,
     select the Installation Menu.  From this menu, you may elect to use
     the following option. When prompted for the INSTALL enter the patch #
     (SD*5.3*762):
  
     a. Backup a Transport Global - This option will create a backup
        message of any routines exported with this patch. It will not
        back up any other changes such as Data Dictionaries (DDs) or
        templates.
     b. Compare Transport Global to Current System - This option will
        allow you to view all changes that will be made when this patch
        is installed.  It compares all components of this patch
        (routines, DDs, templates, etc.).
     c. Verify Checksums in Transport Global - This option will allow
        you to ensure the integrity of the routines that are in the
        transport global.
  
 4.  From the Installation Menu, select the Install Package(s) option and
     choose the patch to install.
  
 5.  When prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of
     Install? NO//', respond NO.
  
 6.  When prompted 'Want KIDS to INHIBIT LOGONs during the install? NO//',
     respond NO.
  
 7.  When prompted 'Want to DISABLE Scheduled Options, Menu Options, and
     Protocols? YES//', respond NO.
  
 8.  If prompted 'Delay Install (Minutes):  (0 - 60): 0//', respond 0.
  
 Post-Installation Instructions:
 ------------------------------
 Post-install routine SDEC762P updates the CURRENT GUI VERSION Field (#2)
 and the GUI VERSION EFFECTIVE DATE Field (#3) in the SDEC SETTINGS File
 (#409.98) to reflect new GUI version 1.7.0.2 R1.
  
 Backout Plan:
 ------------
 For backout assistance, please submit a ServiceNow ticket to the VSE GUI 
 T3 group.
  
 GUI Retrieval Instructions:
 --------------------------
 System Center Configuration Manager (SCCM) packages have been developed
 for the distribution of the GUI to the users' workstations:
 VA VistA Scheduling GUI_P 1.7.0P (GUI for Production)
 and VA VistA Scheduling GUI_T 1.7 .0T (GUI for Test).
  
 SCCM administrators are responsible for pushing the packages to the 
 workstations. The VistA patch installation and the SCCM push must be
 coordinated for each site by the patch installers and the SCCM
 administrators.
     
 Step 1 (Core): VistA sites using the SCCM push shall install the VSE 
 PRODUCTION and TEST GUIs on applicable workstations using the
 Configuration Management Control Board (CMCB) package provided by Systems
 Design (SD). The TEST GUIs will be used to provide training to VS users.
     
  - CMCB Build Document (Production):
 https://vaww.eie.domain.ext/SysDesign/CS/DTStatus/SitePages/Build%20Documents
 .aspx?pid=216
     
  - CMCB Build Document (Test):
 https://vaww.eie.domain.ext/SysDesign/CS/DTStatus/SitePages/Build%20Documents
 .aspx?pid=228
     
 Sites that do not use the SCCM push will be alerted to the new GUI via an 
 Action Item e-mail from Office of Information and Technology (OIT)
 Information Technology Operations and Services (ITOPS). Follow the
 detailed instructions in the Action Item e-mail for VACS installation. The
 IO HBMC FO Application Division will lead and coordinate deployment
 activities with EUO, Client Technology, Citrix Back Office and Area
 Managers, and other OIT and business partners as required.
  
 Implementation Manager Point of Contact:
     
 Name: Yoojin Lee
     
 Phone: 206-277-4608 Email: yoojin.lee@domain.ext

Routine Information:
====================
The second line of each of these routines now looks like:
 ;;5.3;SCHEDULING;**[Patch List]**;AUG 13, 1993;Build 4

The checksums below are new checksums, and
 can be checked with CHECK1^XTSUMBLD.

Routine Name: SDEC762P
    Before:       n/a   After:  B2225162  **762**

=============================================================================
User Information:
Entered By  :                               Date Entered  : JUL 01, 2020
Completed By:                               Date Completed: AUG 20, 2020
Released By :                               Date Released : AUG 20, 2020
=============================================================================


Packman Mail Message:
=====================

$END TXT