$TXT Created by                 MDEVC.FO-BIRM.DOMAIN.EXT  (KIDS) on Tuesday, 03/25/25 at 12:53
=============================================================================
Run Date: MAY 19, 2025                     Designation: VPR*1*36
Package : VPR - VIRTUAL PATIENT RECORD        Priority: Mandatory
Version : 1        SEQ #35                      Status: Released
                  Compliance Date: JUN 19, 2025
=============================================================================

Associated patches: (v)VPR*1*4     <<= must be installed BEFORE `VPR*1*36'

Subject: VITALS UoM FIXES

Category: 
  - Routine

Description:
============

 This patch to the Virtual Patient Record (VPR) application will add the
 following:
  
 1. ObservationValueUnits property is added to entity VPR VITAL TYPE 
    returning unit of measure to the SDA using values returned from routine
    VPRDGMV. For backwards-compatibility, units is kept and UCUM values are
    added as a separate property.
  
 Old:
   <ObservationCode>
     <SDACodingStandard>VHAT</SDACodingStandard>
     <OriginalText>T</OriginalText>
     <Code>4500638</Code>
     <Description>TEMPERATURE</Description>
   </ObservationCode>
  
 New:
   <ObservationCode>
     <SDACodingStandard>VHAT</SDACodingStandard>
     <OriginalText>T</OriginalText>
     <Code>4500638</Code>
     <Description>TEMPERATURE</Description>
     <ObservationValueUnits>
       <SDACodingStandard>UCUM</SDACodingStandard>
       <OriginalText>F</OriginalText>
       <Code>[degF]</Code>
     </ObservationValueUnits>
   </ObservationCode>
  
   
 2.  For the VPR GET PATIENT DATA RPC, property name "ucumUnits" added to 
     XML-formatted result.
  
 Old:
 </measurement>
 <measurement id='10969981' vuid='4500638' name='TEMPERATURE' value='98.9' 
 units=
 'F' metricValue='37.2' metricUnits='C' high='101' low='96' >
 <qualifiers>
 <qualifier name='TEMPORAL' vuid='4537028' />
 </qualifiers>
 </measurement>
  
 New:
 </measurement>
 <measurement id='10969981' vuid='4500638' name='TEMPERATURE' value='98.9' 
 units=
 'F' ucumUnits='[degF]' metricValue='37.2' metricUnits='C' high='101' 
 low='96' >
 <qualifiers>
 <qualifier name='TEMPORAL' vuid='4537028' />
 </qualifiers>
 </measurement>
  
  
 3.  Queue a task to run after 10:00pm calling the vitals predictor.  This
     will deliver a resulting message when executed. The results will
     report the number of vitals to need validated in SDA when the Call To
     Populate (CTP) is performed in Health Connect at a different time.
  
 Sample Task:
 ------------
  
 Task list  Mar 21, 2025 9:46 am                                     Page 1
 --------------------------------------------------------------------------
 426637: PREDICTOR^VPR1P36, VPR*1*36 post-install of CTP predictor. No devi
     MDEVC,CDV.  From Today at 9:39,  By you.  Scheduled for Today at 22:05
 --------------------------------------------------------------------------
  
 Sample mailman message:
 -----------------------
  
 Subj: VPR*1*36 >> PREDICTOR TASK COMPLETED AT SITE: #500  [#329766]
 03/21/25@22:05  6 lines
 From: POSTMASTER  In 'IN' basket.   Page 1  *New*
 --------------------------------------------------------------------------
 -----
 There's been a VPR*1*36 PREDICTOR run at site: 500.
  
 Total 'Observation' results returned: 92
                #updates: 92
                #deletes: 0
  
  
 Enter message action (in IN basket): Ignore// 
  
  
  
  
  
 Patch Components: 
 ----------------- 
  
 Entities Associated: 
  
 Entity Name                        New/Modified/Deleted 
 -----------                        -------------------- 
 VPR VITAL TYPE                     Modified
   
  
 Files & Fields Associated:         N/A 
  
   
  
 Forms Associated:                  N/A 
  
   
  
 Mail Groups Associated:            N/A 
  
   
  
 Options Associated:                N/A 
  
   
  
 Protocols Associated:              N/A 
  
  
 Remote Procedure Calls Associated: N/A 
  
   
  
 Security Keys Associated:          N/A 
  
   
  
 Templates Associated:              N/A 
  
   
  
   
  
 Additional Information: 
 ----------------------- 
  
   
  
 Blood Bank Team Coordination:      N/A 
  
   
  
 New Service Requests (NSRs):       N/A 
  
   
  
 Patient Safety Issues (PSIs):      N/A 
  
   
  
 Defect Tracking System Ticket(s) & Overview:  
  
   
  
  
 Test Sites:
 -----------
 Finger Lakes at Upstate New York
 Biloxi VAMC
  
  
 SNOW Change Order #:
 --------------------------------
 UPSTATE NEW YORK HCS - CHG0591288 
 Biloxi VAMC          - CHG0594911  
    
  
   
  
 Software and Documentation Retrieval Instructions: 
  
 -------------------------------------------------- 
  
 The software for this patch is being released via a PackMan message. 
  
   
  
   
  
 Patch Installation: 
  
 ------------------- 
  
   
  
 Pre/Post Installation Instructions: 
 -----------------------------------
 The post-installation process will task off the CTP predictor for 
 VPR*1*36 (vitals) in the background.
  
 Note: This task will be scheduled to run after 10:00pm local time.
       
       Separate Mailman messages will be generated to the installer
       after the CTP predictor has completed.
  
   
   
  
 This patch should be installed during non-peak hours to minimize  
 potential disruption to users. This patch should take less than 1  
 minute to install. 
  
   
  
 Installation Instructions: 
  
   
  
 1.  Choose the PackMan message containing this build. Then select  
     the INSTALL/CHECK MESSAGE PackMan option to load the build. 
  
   
  
 2.  From the Kernel Installation and Distribution System Menu,  
     select the Installation Menu.  From this menu,  
  
   
  
     A. Select the Verify Checksums in Transport Global  
        option to confirm the integrity of the routines that  
        are in the transport global. When prompted for the  
        INSTALL NAME enter VPR*1.0*36.  
  
    
  
     B. Select the Backup a Transport Global option to create 
        a backup message. You must use this option and specify  
        what to backup; the entire Build or just Routines. 
        The backup message can be used to restore the routines 
        and components of the build to the pre-patch condition. 
  
   
  
        i.   At the Installation option menu, select Backup  
             a Transport Global 
  
        ii.  At the Select INSTALL NAME prompt, enter your  
             build VPR*1.0*36 
  
        iii. When prompted for the following, enter "R" for  
             Routines or "B" for Build. 
  
   
  
                Select one of the following: 
  
   
  
                       B         Build 
  
                       R         Routines 
  
   
  
                 Enter response: Build 
  
   
  
        iv.  When prompted "Do you wish to secure this message? NO//", 
             press <enter> and take the default response of "NO". 
  
        v.   When prompted with, "Send mail to: Last name, First  
             Name", press <enter> to take default recipient. Add  
             any additional recipients. 
  
        vi.  When prompted with "Select basket to send to: IN//",  
             press <enter> and take the default IN mailbox or select  
             a different mailbox. 
  
   
  
     C. You may also elect to use the following options:  
  
        i.  Print Transport Global - This option will allow  
            you to view the components of the KIDS build. 
  
        ii. Compare Transport Global to Current System - This  
            option will allow you to view all changes that will  
            be made when this patch is installed.  It compares  
            all of the components of this patch, such as  
            routines, DDs, templates, etc. 
  
   
  
     D. Select the Install Package(s) option and choose the  
        patch to install.  
  
    
  
        i.  If prompted 'Want KIDS to Rebuild Menu Trees Upon  
            Completion of Install? NO//', answer NO. 
  
        ii. When prompted 'Want KIDS to INHIBIT LOGONs during the  
            install? NO//', answer NO. 
  
       iii. If prompted 'Want to DISABLE Scheduled Options, Menu  
            Options, and Protocols? NO//', answer <NO>. 
  
       iv.  When prompted 'Delay Install (Minutes):  (0 - 60): 0//', 
            answer 0. 
  
   
  
 Post-Installation Instructions:
 -------------------------------
 Routine VPR1P36 can be deleted once the tasked post-installation "CTP
 predictor" has completed.
   
  
   
  
 Backout Procedures: 
  
 ------------------- 
  
 If rollback/backout is required, the KIDS build that was created in  
 step 2B may be installed to restore all modified components back to  
 their pre-patch released state. 
  
   
  
 The message containing the backed-up components can be loaded with the 
 "Xtract PackMan" function at the Message Action prompt. The Packman 

Routine Information:
====================
The second line of each of these routines now looks like:
 ;;1.0;VIRTUAL PATIENT RECORD;**[Patch List]**;Sep 01, 2011;Build 23

The checksums below are new checksums, and
 can be checked with CHECK1^XTSUMBLD.

Routine Name: VPR1P36
    Before:       n/a   After: B33998912  **36**
Routine Name: VPRDGMV
    Before: B42263746   After: B44555998  **1,4,36**
 
Routine list of preceding patches: 4

=============================================================================
User Information:
Entered By  :                               Date Entered  : MAY 13, 2024
Completed By:                               Date Completed: MAY 19, 2025
Released By :                               Date Released : MAY 19, 2025
=============================================================================


Packman Mail Message:
=====================

$END TXT