============================================================================= Run Date: OCT 19, 2023 Designation: DG*5.3*1098 Package : DG - REGISTRATION Priority: Mandatory Version : 5.3 SEQ #965 Status: Released Compliance Date: OCT 27, 2023 ============================================================================= Associated patches: (v)DG*5.3*1082 <<= must be installed BEFORE `DG*5.3*1098' (v)DG*5.3*1090 <<= must be installed BEFORE `DG*5.3*1098' Subject: WWII VETERAN AND UNCHARACTERIZED DISCHARGE UPDATES Category: - Enhancement (Mandatory) - Routine - Data Dictionary - Input Template Description: ============ Veterans Health Information Systems and Technology Architecture (VistA) Registration, Eligibility & Enrollment (REE) patch DG*5.3*1098 is being released to support enhancements for the Eligibility and Enrollment (E&E) program. Patch DG*5.3*1098 is also being released in support of the Veterans Health Administration (VHA) Enrollment System (VES) 6.7 release. DG*5.3*1098 is being released with EAS*1.0*222 in Host File DG_53_P1098.KID. DG*5.3*1098 modifies the following VHA Profile (VHAP) of the HEALTH BENEFIT PLAN file (#25.11): - VETERAN FULL MED BENEFITS TX COPAY EXMT AND RX COPAY REQ 6 DG*5.3*1098 modifies an existing entry, WORLD WAR I, in the MAS ELIGIBILITY CODE file (#8.1). DG*5.3*1098 modifies an existing entry, WORLD WAR I, in the ELIGIBILITY CODE file (#8). DG*5.3*1098 adds a new entry, WORLD WAR II, in the MAS ELIGIBILITY CODE file (#8.1). DG*5.3*1098 adds a new entry, WORLD WAR II, in the ELIGIBILITY CODE file (#8). Patch DG*5.3*1098 adds the new entry "UNCHARACTERIZED" to the TYPE OF DISCHARGE file (#25). DG*5.3*1098 modifies existing entries in the INCONSISTENT DATA ELEMENTS file (#38.6). DG*5.3*1098 modifies Group [1] of the ELIGIBILITY STATUS DATA, SCREEN <7>. DG*5.3*1098 modifies the input template [DG LOAD EDIT SCREEN 7]. Patch DG*5.3*1098 modifies the Enrollment Priority algorithm so that the system shall assign Priority Group 6 to a Veteran with the World War II Eligibility Code, unless the Veteran otherwise qualifies for Priority Group 1, 2, 3, 4, or 5. NOTE: For additional information on the Enrollment Priority Algorithm, please see the 'PIMS Version 5.3 ADT Module User Manual' located on the Veteran Affairs (VA) Software Document Library. Listing of Updates: =================== This patch makes the following enhancements to VistA REE: ************************************************************************** SECTION 1: DATA DICTIONARY UPDATES ************************************************************************** 1. The WORLD WAR I eligibility code of the MAS ELIGIBILITY CODE (#8.1) file has its INACTIVE field set to YES: NAME: WORLD WAR I CARD COLOR: BLUE ABBREVIATION: WWI VA CODE NUMBER: 2 TYPE: VETERAN PRINT NAME: WORLD WAR I INACTIVE: YES SELECT AS ADDITIONAL: YES 2. The WORLD WAR I eligibility code of the ELIGIBILITY CODE (#8) file has its INACTIVE field set to YES. This entry is updated by the post-install routine POST^DG531098P: NAME: WORLD WAR I CARD COLOR: BLUE ABBREVIATION: WWI VA CODE NUMBER: 2 TYPE: VETERAN PRINT NAME: WORLD WAR I INACTIVE: YES SELECT AS ADDITIONAL: YES MAS ELIGIBILITY CODE: WORLD WAR I ID FORMAT: VA STANDARD 3. The WORLD WAR II eligibility code is added to the MAS ELIGIBILITY CODE (#8.1) file. This entry is provided in the build file and installed with the patch: NUMBER: 29 NAME: WORLD WAR II CARD COLOR: BLUE ABBREVIATION: WWII VA CODE NUMBER: 2 TYPE: VETERAN PRINT NAME: WORLD WAR II SELECT AS ADDITIONAL: YES 4. The WORLD WAR II eligibility code is added to the ELIGIBILITY CODE (#8) file. This entry is added to the file by the post-install routine POST^DG531098P: NAME: WORLD WAR II CARD COLOR: BLUE ABBREVIATION: WWII VA CODE NUMBER: 2 TYPE: VETERAN PRINT NAME: WORLD WAR II SELECT AS ADDITIONAL: YES MAS ELIGIBILITY CODE: WORLD WAR II ID FORMAT: VA STANDARD AGENCY: VA MAKE RECORD SENSITIVE?: NO 5. In the HEALTH BENEFIT PLAN file (#25.11) for VHAP plan code VETERAN FULL MED BENEFITS TX COPAY EXMT AND RX COPAY REQ 6 (#242) the LONG DESCRIPTION field (#.04) is modified as shown below: NAME : VETERAN FULL MED BENEFITS TX COPAY EXMT AND RX COPAY REQ 6 PLAN CODE: 242 COVERAGE CODE: FB01011 SHORT DESCRIPTION: FM RxCo 6 LONG DESCRIPTION: All enrolled Veterans have a comprehensive medical benefits package, which VA administers through an annual patient enrollment system. Veterans who meet Veteran status for VA healthcare benefits and are not subject to copay for their inpatient, outpatient services but are subject to copay for their medications. Veterans are exempt from copayments for inpatient, outpatient services and medications related to their Service Connected (SC) related disability and special authority factor(s) - Agent Orange Exposure (AO), Southwest Asia Conditions (SWA), Ionizing Radiation (IR), Nose Throat Radium (NTR), Shipboard Hazard and Defense (SHAD), Combat Veteran (CV), Camp Lejeune (CL), Military Sexual Trauma (MST), Cleland Dole Act World War II (WWII). Veterans assigned this VHAP must meet one of the following conditions: . Determined to be 0% Compensable SC* . Cleland Dole Act World War II (WWII) *They are exempt from copay for medications related to their SC rated condition, but they must complete a Pharmacy Copay Exemption Test and the outcome is Non-Exempt. They must pay copay for their NSC medication copays. 6. A new entry is added to the TYPE OF DISCHARGE (#25) file. a. The NUMBER (#.001) field is 7 b. The NAME (#.01) field is UNCHARACTERIZED c. The ABBREVIATION (#1) field is NULL d. The user may select the new value UNCHARACTERIZED when entering or editing a Military Service Episode on the MILITARY SERVICE DATA, SCREEN <6.1> screen in VistA. e. The new entry will be displayed on the screen as shown below: ** BEGIN SCREEN CAPTURE ** Military Service Jul 12, 2023@15:44:02 Page: MILITARY SERVICE DATA, SCREEN <6.1> DGPATIENT,ONE XXX XX, XXXX XXX-XX-XXXX NSC VETERAN Service Branch/Component Service # Entered Separated Discharge __________________________________________________________________________ <1> ARMY/REGULAR UNKNOWN 01/01/1995 06/05/1997 UNCHARACT + Next Screen - Prev Screen ?? More Actions AD Add DE Delete ED Edit VH View History Select Action:Quit// ** END SCREEN CAPTURE ** 7. In the INCONSISTENT DATA ELEMENTS file (#38.6), DATE OF DEATH IN THE FUTURE (#16), THE DATE OF DEATH IS BEFORE THE DATE OF BIRTH (#308). USE FOR Z07 CHECK field (#6) was changed from YES to NO. NUMBER: 16 NAME: DATE OF DEATH IN FUTURE TEXT: 'DATE OF DEATH' IS IN FUTURE KEY REQUIRED: NO KEY REQUIRED SET ELIG DR STRING: NO CHECK/DON'T CHECK: CHECK USE FOR Z07 CHECK: NO DESCRIPTION: Inconsistency results if the patient has a 'DATE OF DEATH' entered which is a future date. NUMBER: 308 NAME: DATE OF DEATH BEFORE DOB TEXT: THE DATE OF DEATH IS BEFORE THE DATE OF BIRTH KEY REQUIRED: NO KEY REQUIRED SET ELIG DR STRING: NO CHECK/DON'T CHECK: CHECK USE FOR Z07 CHECK: NO DESCRIPTION: The Date of Death cannot be prior to the Date of Birth. 8. In the INCONSISTENT DATA ELEMENTS file (#38.6), CLAIM FOLDER NUMBER INVALID (#406) was modified. USE FOR Z07 CHECK field (#6) was changed from YES to NO and the value in CHECK/DON'T CHECK field (#5) was set to DON'T CHECK. NUMBER: 406 NAME: CLAIM FOLDER NUMBER INVALID TEXT: CLAIM FOLDER NUM MUST BE 7 TO 8 DIGITS. IF 9 DIGITS THEN MUST BE SSN KEY REQUIRED: NO KEY REQUIRED SET ELIG DR STRING: NO CHECK/DON'T CHECK: DON'T CHECK USE FOR Z07 CHECK: NO DESCRIPTION: Claim Folder Number must consist of 7 or 8, or 9 numbers if SSN. 9. The WRITE AUTHORITY was set to "^" for CLAIM FOLDER field (#.313) in the PATIENT file (#2). DATA NAME GLOBAL DATA ELEMENT TITLE LOCATION TYPE -------------------------------------------------------------------------- 2,.313 CLAIM NUMBER .31;3 FREE TEXT (audited) INPUT TRANSFORM: S DFN=DA D EV^DGLOCK I $D(X) S L=$S($D(^DP T(DA,0)):$P(^(0),U,9),1:X) W:X?1"SS".E " ",L S:X?1"SS".E X=L K:$L(X)>9 X Q:'$D(X) I X'=L K:$L(X)>8!($L(X)<7)!'(X?.N) X OUTPUT TRANSFORM: S Y=$E(Y,1,10) LAST EDITED: JUN 09, 2023 HELP-PROMPT: Enter this patient's claim number as 7-8 numerics or enter SS if the claim number is the same as his/her SSN. Pseudo SSNs are not allowed. DESCRIPTION: If the applicant is a veteran enter his/her claim number as 7-8 numerics or by entering the characters 'SS' if his/her claim number is the same as his/her social security number. Once eligibility has been verified only users who hold the designated security key may enter/edit this field. AUDIT: YES, ALWAYS DELETE TEST: 1,0)= S DFN=DA D EV^DGLOCK I '$D(X) WRITE AUTHORITY: ^ GROUP: ECD NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER CROSS-REFERENCE: 2^AVAFC313^MUMPS 1)= I ($T(AVAFC^VAFCDD01)'="") S VAFCF=".3 13;" D AVAFC^VAFCDD01(DA) 2)= I ($T(AVAFC^VAFCDD01)'="") S VAFCF=".3 13;" D AVAFC^VAFCDD01(DA) This cross reference is used to remember that changes were made to the PATIENT file (#2) outside of the Registration process. Execution of this cross reference will create an entry in the ADT/HL7 PIVOT file (#391.71) and mark it as requiring transmission of an HL7 ADT-A08 message. The local variable VAFCFLG will be set to 1 if the cross reference is not executed because the change is being made from within the Registration process. Execution of this cross reference can be prevented by setting the local variable VAFCA08 equal to 1. The local variable VAFCF is used to identify the field edited. This data is stored in the FIELD(S) EDITED (#2.1) field in the ADT/HL7 PIVOT file (#391.71). CROSS-REFERENCE: 2^AENR313^MUMPS 1)= D EVENT^IVMPLOG(DA) 2)= D EVENT^IVMPLOG(DA) 3)= DO NOT DELETE This cross-reference is used to notify HEC of changes that may affect enrollment. 10. The WRITE AUTHORITY was set to "^" and a period was added to the end of the HELP-PROMPT for CLAIM FOLDER LOCATION field (#.314) in the PATIENT file (#2). DATA NAME GLOBAL DATA ELEMENT TITLE LOCATION TYPE -------------------------------------------------------------------------- 2,.314 CLAIM FOLDER LOCATION .31;4 POINTER TO INSTITUTION FILE (#4 ) INPUT TRANSFORM: S DIC("S")="I $$CFLTF^DGREGDD(Y)" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X LAST EDITED: JUL 12, 2023 HELP-PROMPT: Enter the location of the patient's claim folder. DESCRIPTION: This is the location of the patient's claim folder. It must be an entry in the INSTITUTION File. Valid facility types: RO (Regional Office) RO&IC (Regional Office and Insurance Center) RO-OC (Regional Office - Outpatient Clinic) RPC (Record Processing Center) M&ROC (Medical and Regional Office Center) M&ROC (M&RO) (Medical and Regional Office Center) TECHNICAL DESCR: This is a pointer to the INSTITUTION File (#4). SCREEN: S DIC("S")="I $$CFLTF^DGREGDD(Y)" EXPLANATION: Only allow active sites with station # and valid facility type WRITE AUTHORITY: ^ NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER CROSS-REFERENCE: 2^ACFL4^MUMPS 1)= D SET^DGREGDD(DA,X) 2)= D KILL^DGREGDD(DA) This sets the *CLAIM FOLDER LOCATION field to be the station number concatenated with the name of the institution. FILES POINTED TO FIELDS INSTITUTION (#4) CLAIM FOLDER LOCATION (#.314) ************************************************************************** SECTION 2: REGISTRATION SCREEN UPDATES ************************************************************************** 1. The Patient Inquiry [DG PATIENT INQUIRY] option displays the new WORLD WAR II eligibility with Other Eligibilities: when the WORLD WAR II eligibility is assigned to the patient. ** BEGIN SCREEN CAPTURE ** DGPATIENTONE,TEST ONE; ########## ###-##-### MMM, DD, YYYY ========================================================================== Combat Vet Status: NOT ELIGIBLE Primary Eligibility: NSC (VERIFIED) Other Eligibilities: WORLD WAR II, Unemployable: NO Permanent & Total Disabled: NO Means Test Signed?: Patient's status is MT COPAY REQUIRED based on primary means test Has agreed to pay the deductible Primary Means Test Last Applied 'MAY 31,2023' (COMPLETED: MAY 31,2023) Medication Copayment Exemption Status: NON-EXEMPT Patients income is greater than Copay Income Threshold Last Rx Copay Exemption date: MAY 31, 2023 Type to continue or '^' to exit: ** END SCREEN CAPTURE ** 2. The ELIGIBILITY STATUS DATA, SCREEN <7> screen has been modified. a. Group [1] will not display the labels "Claim Number:" and "Folder Loc.:" when the CLAIM NUMBER field (#.313) and the CLAIM FOLDER LOCATION field (#.314) from the PATIENT file (#2) are BOTH null. ** START SCREEN CAPTURE ** ELIGIBILITY STATUS DATA, SCREEN <7> EHRMPATIENT, ONE MON DD,CCYY 000-00-0000 NSC VETERAN ========================================================================== [1] Patient Type: NSC VETERAN Veteran: YES Svc Connected: YES SC Percent: 50% SC Award Date: JUN 27,2021 Unemployable: UNANSWERED P&T: UNANSWERED Rated Incomp.: UNANSWERED [2] Aid & Attendance: UNANSWERED Housebound: UNANSWERED VA Pension: UNANSWERED VA Disability: UNANSWERED Total Check Amount: NOT APPLICABLE GI Insurance: UNANSWERED Amount: UNANSWERED [3] Primary Elig Code: NSC Other Elig Code(s): TRICARE Period of Service: PERSIAN GULF WAR [4] Service Connected Conditions as stated by applicant --------------------------------------------------- NONE STATED to CONTINUE, 1-4 or ALL to EDIT, ^N for screen N or '^' to QUIT: ** END SCREEN CAPTURE ** b. Users cannot add the new WORLD WAR II eligibility code in data group [3] at the PRIMARY ELIGIBILITY CODE prompt. c. The WORLD WAR II eligibility is allowed in the Other Elig Code(s) in data group [3] for patients that meet all of the following: i. The patient is a Veteran. ii. The patient has a Military Service Episode on or between December 07, 1941 and December 31, 1946. iii. The patient's birthdate is prior to January 01, 1933. d. The Help Text ("?", "??") for the PRIMARY ELIGIBILITY CODE prompt does not list WORLD WAR II in the selection list. e. The Input Template DG LOAD EDIT SCREEN 7 is modified to prevent the entry or edit of the Claim Number or Claim Folder Loc fields. in data group [1]. f. VistA Registration options that display the ELIGIBILITY STATUS DATA, SCREEN <7> screen include: Register a Patient [DG REGISTER PATIENT] Load/Edit Patient Data [DG LOAD PATIENT DATA] Eligibility Verification [DG ELIGIBILITY VERIFICATION] View Registration Data [DG REGISTRATION VIEW] Enter a Request/Notification [FBCH ENTER REQUEST] Patch Components: ----------------- Files & Fields Associated: File Name (Number) Field Name (Number) New/Modified/Deleted ------------------ ------------------- -------------------- PATIENT (#2) ELIGIBILITY Modified (#2.0361,.01) CLAIM NUMBER (#.313) Modified CLAIM FOLDER LOCATION (#.314) Modified ELIGIBILITY ELIGIBILITY (#.01) CODE (#8) Modified HEALTH BENEFIT PLAN (#25.11) Modified Forms Associated: Form Name File Number New/Modified/Deleted --------- ----------- -------------------- N/A Mail Groups Associated: Mail Group Name New/Modified/Deleted --------------- -------------------- N/A Options Associated: Option Name Type New/Modified/Deleted ----------- ---- -------------------- N/A Protocols Associated: Protocol Name New/Modified/Deleted ------------- -------------------- N/A Security Keys Associated: Security Key Name ----------------- N/A Templates Associated: Template Name Type File Name (Number) New/Modified/Deleted ------------- ---- ------------------ -------------------- DG LOAD EDIT SCREEN 7 INPUT PATIENT (#2) Modified Remote Procedures Associated: Remote Procedure Name New/Modified/Deleted --------------------- -------------------- N/A Parameter Definitions Associated: Parameter Name New/Modified/Deleted -------------- -------------------- N/A Additional Information: ----------------------- N/A New Service Requests (NSRs): ---------------------------- N/A Patient Safety Issues (PSIs): ----------------------------- N/A Defect Tracking System Ticket(s) & Overview: -------------------------------------------- N/A Test Sites: ----------- VA Black Hills Health Care System (Fort Meade, Hot Springs), SD Durham VA Medical Center, NC Orlando VA Medical Center, FL Test Sites - SNOW Change Order #: --------------------------------- VA Black Hills Health Care System: CHG0413829 Durham VA Medical Center: CHG0413676 Orlando VA Medical Center: CHG0413676 Software and Documentation Retrieval Instructions: -------------------------------------------------- The software for this patch is being released using a host file. The host file is available at the following location: /srv/vista/patches/SOFTWARE/DG_53_P1098.KID Documentation describing the new functionality is included in this release. Documentation can be found on the VA Software Documentation Library at: https://www.domain.ext/vdl/. Documentation can also be obtained at https://download.vista.domain.ext/index.html/SOFTWARE Documentation Title File Name --------------------------------------------------------------------- DG_53_P1098.KID Release Notes DG_5_3_P1098_RN.PDF PIMS Version 5.3 Technical Manual PIMS_TM.PDF PIMS Version 5.3 User Manual - Registration Menu PIMS_REG_UM.PDF PIMS Version 5.3 ADT Module User Manual ADTBE_UM.PDF Patch Installation: ------------------- Pre/Post Installation Overview: ------------------------------- The WORLD WAR II eligibility code is added to the ELIGIBILITY CODE (#8) file by the post install routine POST^DG531098P. The WORLD WAR I eligibility code is set to INACTIVE in the ELIGIBILITY CODE (#8) file by routine POST^DG531098P. The routine DG531098P is automatically deleted from the system when the patch install completes. Pre-Installation Instructions: ------------------------------ This patch may be installed with users on the system although it is recommended that it be installed during non-peak hours to minimize potential disruption to users. This patch should take less than 5 minutes to install. The following options should be disabled during installation: Option Name Menu Text ----------- --------- Register a Patient [DG REGISTER PATIENT] Load/Edit Patient Data [DG LOAD PATIENT DATA] View Registration Data [DG REGISTRATION VIEW] Eligibility Verification [DG ELIGIBILITY VERIFICATION] Collateral Patient Register [DG COLLATERAL PATIENT] Patient Enrollment [DGEN PATIENT ENROLLMENT] Installation Instructions: 1. Use the Load a Distribution option contained on the Kernel Installation and Distribution System Menu to load the Host file. When prompted to "Enter a Host File:" enter /srv/vista/patches/SOFTWARE/DG_53_P1098.KID 2. From the Kernel Installation and Distribution System Menu, select the Installation Menu. From this menu, A. Select the Verify Checksums in Transport Global option to confirm the integrity of the routines that are in the transport global. When prompted for the INSTALL NAME enter the patch or build name. (ex. ) NOTE: Using will not bring up a Multi-Package build even if it was loaded immediately before this step. It will only bring up the last patch in the build. B. Select the Backup a Transport Global option to create a backup message. You must use this option and specify what to backup; the entire Build or just Routines. The backup message can be used to restore the routines and components of the build to the pre-patch condition. i. At the Installation option menu, select Backup a Transport Global ii. At the Select INSTALL NAME prompt, enter your build iii. At the Subject prompt after the subject name, press Enter to accept the default iv. When prompted for the following, enter "R" for Routines or "B" for Build. Select one of the following: B Build (including Routines) R Routines Only Backup Type: B// Press Enter to select Build v. When prompted for Enter a Host File: Enter the path and name for the host file backup file. If you don't specify a directory, the default directory of HFS Primary Directory will be used. C. You may also elect to use the following options: i. Print Transport Global - This option will allow you to view the components of the KIDS build. ii. Compare Transport Global to Current System - This option will allow you to view all changes that will be made when this patch is installed. It compares all of the components of this patch, such as routines, DDs, templates, etc. D. Select the Install Package(s) option and choose the patch to install. i. If prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of Install? NO//', answer NO. ii. When prompted 'Want KIDS to INHIBIT LOGONs during the install? NO//', answer NO. iii. When prompted 'Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO//', answer YES. a. When prompted 'Enter options you wish to mark as 'Out Of Order':', select the following option: Option Name Menu Text ----------- --------- Register a Patient [DG REGISTER PATIENT] Load/Edit Patient Data [DG LOAD PATIENT DATA] View Registration Data [DG REGISTRATION VIEW] Eligibility Verification [DG ELIGIBILITY VERIFICATION] Collateral Patient Register [DG COLLATERAL PATIENT] Patient Enrollment [DGEN PATIENT ENROLLMENT] Press the Enter key when you are done selecting options. b. When prompted 'Enter protocols you wish to mark as 'Out Of Order':', press the Enter key. c. When prompted 'Delay Install (Minutes): (0 - 60): 0//', answer 0. Post-Installation Instructions: ------------------------------- N/A Back-Out/Roll Back Plan: ------------------------ In the event a site/patch installer determines that this patch should be backed out, the site/patch installer should submit a YOUR IT Services ticket with the Enterprise Service Desk (ESD) for assistance with the procedure. Any issues would need to be evaluated to determine if: a back-out of the software is appropriate; a new patch is needed; or if data requires correction or restoration. During installation, if the option Backup a Transport Global [XPD BACKUP] was run as directed, either the entire build or routines will be available for restoration should the need arise. If only the routines were backed up, they will be available in a MailMan message with a subject similar to the following: "Subject: Backup of DG*5.3*1098, on Sep 27, 2023." For multi-builds, if the full build was backed up, the backup will be available in the Host File specified during the backup process. Routine Information: ==================== The second line of each of these routines now looks like: ;;5.3;Registration;**[Patch List]**;Jan 26 2022;Build 8 The checksums below are new checksums, and can be checked with CHECK1^XTSUMBLD. Routine Name: DG531098P Before: n/a After: B16298186 **1098** Routine Name: DGENELA4 Before: B96615325 After: B98611609 **232,275,306,327,314,367,417, 437,456,491,451,564,672,659, 653,688,803,754,841,909,972, 952,993,1018,1090,1098** Routine Name: DGLOCK1 Before: B27650469 After: B39047183 **121,314,1014,1061,1075,1081, 1082,1098** Routine Name: DGRP7 Before: B28664422 After: B29616454 **528,653,688,842,952,977,1016, 1061,1075,1082,1098** Routine Name: DGRPC Before: B63990622 After: B63963472 **108,121,314,301,470,489,505, 451,568,585,641,653,688,754, 797,867,903,952,1027,1045,1081, 1098** Routine Name: DGRPC3 Before: B60632675 After: B60686211 **451,632,673,657,688,754,797, 867,903,952,1098** Routine list of preceding patches: 1082, 1090 ============================================================================= User Information: Entered By : Date Entered : APR 06, 2023 Completed By: Date Completed: OCT 19, 2023 Released By : Date Released : OCT 19, 2023 ============================================================================= Packman Mail Message: ===================== No routines included