$TXT Created by LOUCK,KEVIN C at DEVFEX.FO-ALBANY.MED.VA.GOV (KIDS) on Thursday, 10/22/09 at 13:46 ============================================================================= Run Date: MAY 03, 2010 Designation: DVBA*2.7*143 Package : DVBA - AUTOMATED MED INFO EXCHANGE Priority: Mandatory Version : 2.7 SEQ #134 Status: Released Compliance Date: JUN 03, 2010 ============================================================================= Associated patches: (v)DVBA*2.7*126<<= must be installed BEFORE `DVBA*2.7*143' (v)DVBA*2.7*136<<= must be installed BEFORE `DVBA*2.7*143' (v)DVBA*2.7*140<<= must be installed BEFORE `DVBA*2.7*143' (v)XWB*1.1*53 <<= must be installed BEFORE `DVBA*2.7*143' (v)XU*8*523 <<= must be installed BEFORE `DVBA*2.7*143' (v)DVBA*2.7*146<<= must be installed BEFORE `DVBA*2.7*143' Subject: CAPRI-DEFECT FIXES & DES/BSE ENHANCEMENTS Category: - Enhancement (Mandatory) - Routine - Informational Description: ============ I. OVERVIEW This patch is to announce the release of a new version of the Compensation & Pension Record Interchange (CAPRI) Graphical User Interface (GUI) v143. Additionally, this patch (DVBA*2.7*143) contains VistA server modifications that support the release of the new CAPRI GUI v143. ********************* I M P O R T A N T ************************* * * * This patch (DVBA*2.7*143) may be installed while CAPRI users * * are still using the previously released version of the CAPRI * * GUI (DVBA_27_140.exe). * * * * Once the installation of this patch has been completed, CAPRI * * users should be upgraded to the new released version of the * * CAPRI GUI (DVBA_27_143_12.exe). * * * * Note: For users remaining on an older version of CAPRI, any * * Compensation & Pension Worksheet Module (CPWM) exam templates * * opened and saved using the new CAPRI GUI v143 will not be * * backwards compatible with older versions of the CAPRI GUI * * (i.e. CAPRI GUI v140). Users of older versions of the CAPRI * * GUI will experience errors when attempting to open CPWM exam * * templates saved using the new CAPRI GUI v143. * * * * Please refer to the 'SOFTWARE AND DOCUMENTATION RETRIEVAL' * * section (V.) of this patch message for specific instructions * * regarding the retrieval of the CAPRI GUI v143 software and * * user documentation. * * * ******************************************************************* This patch (DVBA*2.7*143) and CAPRI GUI v143 provides defect fixes and enhancements for the CAPRI GUI and the Automated Medical Information Exchange (AMIE) package. Please refer to the 'FUNCTIONAL OVERVIEW' section (III.) for the specific changes and primary functionality being delivered. II. ASSOCIATED REMEDY TICKETS & NEW SERVICE REQUESTS The following section lists the Remedy tickets and/or New Service Requests associated with this patch. 1. Associated Remedy Ticket(s): ---------------------------- HD0000000344256 - Error message [Error messages in CAPRI after screensaver pushed to all Region 5 desktops] Duplicates: HD0000000345144 HD0000000356973 HD0000000295597 - CAPRI no longer allows copy/paste on C&P Exam Request screen. Duplicates: None 2. Associated New Service Request(s): ---------------------------------- NONE III. FUNCTIONAL OVERVIEW The following is an overview of the changes and primary functionality that will be delivered in CAPRI GUI v143 and this VistA patch (DVBA*2.7*143). 1. The following Remedy tickets are being addressed: a. HD0000000344256 - Error message [Error messages in CAPRI after screensaver pushed to all Region 5 desktops] Problem ------- A screen saver was pushed to all Region 5 desktops and it was reported that immediately after the push, CAPRI users began experiencing a Win32 API function failed error while using the application and having the screen saver engage. Specifically, the error could be duplicated by launching CAPRI, opening an exam template for a patient, letting the PC sit idle for one minute until the screen saver engaged, and then almost immediately upon moving the mouse, an error was displayed and the CAPRI application would shut down. Solution -------- If the user's mouse was over the CAPRI GUI when the screen saver activates, CAPRI would error and then cause the application to shut down. This problem is caused by a Windows API call (Mouse.CursorPos) that fails when the screen saver activates. The active desktop is changed by a screen saver, which causes CAPRI to error when attempting to retrieve the current cursor position using the Windows API. The Windows API (Mouse.CursorPos) will be replaced with a call to another Windows API (Windows.GetCursorPos) to prevent an error when the cursor is over the CAPRI application and the screen saver activates. b. HD0000000295597 - CAPRI no longer allows copy/paste on C&P Exam Request screen. Problem ------- User can no longer cut and paste on the Add New C&P Exam dialogue via the shortcut keys or the right click menu. Solution -------- The code pertaining to the cut and paste functionality was rewritten in relation to the upgrade to Delphi 2006, which in turn corrected the faulty logic. The cut and paste functionality should now work via the menu option, short cut keys, or the right click menu. 2. The following defects that were reported directly to the CAPRI development team are being addressed: a. Defect - Non-compliant Department of Veteran Affairs Seal Problem ------- When the CAPRI application is attempting to establish a network connection, the 'Establishing Network Connection' dialog presented to the user contained an image of a non-compliant Department of Veterans Affairs seal. Specifically, the non-compliant seal graphic contained an eagle with brown tail feathers. Solution -------- The 'Establishing Network Connection' dialog presented to the user has been modified by replacing the non-compliant Department of Veterans Affairs seal image with a compliant image. Specifically, the compliant seal graphic contains an eagle with white tail feathers. b. Defect - Error attempting to enter a new patient having a single character first name. Problem ------- A Veterans Service Representative at the Togus Regional Office reported a problem when attempting to enter a new patient using CAPRI. The patient they were attempting to enter had a first name consisting only of a single character (i.e. "J"). Upon completing the required fields within the 'Enter New Patient' window and clicking on the 'Click to Continue' button, the error dialog "Invalid Argument - Must be LAST, FIRST or IEN" was displayed. Since the CAPRI software validates the name, ensuring that it contains at least a 2 character 'last name' and a 2 character 'first name', the error is generated by attempting to enter the single character first name. The CAPRI software should only be validating the 'first name' to ensure it is at least a single character as does the logic for entering a new patient through the VistA Registration package. Solution -------- The CAPRI software responsible for validating the name of new patient being entered has been modified to validate the name, ensuring that it contains at least a 2 character 'last name' and a single character 'first name'. This will prevent an error from being generated by attempting to enter a new patient having a single character first name. c. Defect - "Problem detecting your division" displays after selecting remote site Problem ------- When the INSTITUTION (#4) file record number of the user's assigned Division does not match the Station number, CAPRI generates two dialog boxes and shuts down. The first dialog box contains the text: "There was a problem detecting your division. Please notify IT support". The second dialog box is an "Application Exception" and contains the text: "FMGets1.Record Number (IENS) is not initialized". The defect impacts only CAPRI remote users logging in through the CLAIMS system. Solution -------- The CAPRI logic has been modified to resolve the remote user's Division by utilizing the Station Number instead of the Division record number (i.e. internal entry number). d. Defect - Semicolon-delimited Access/Verify code entry causes CAPRI to re-prompt for credentials Problem ------- When the user enters the Access and Verify separated by a semicolon into the VistA login dialog box Access code field, CAPRI displays the login dialog box several times after connecting to a remote site. The silent login was only functioning when both the Access and Verify code fields were populated. Solution -------- The custom CAPRI RPCBroker was modified to recognize the semicolon- delimited Access/Verify as a valid entry for performing silent logins. 3. CAPRI/AMIE - Add Foreign Address Support Modifications to CAPRI and the AMIE software were required to support release of the Enrollment VistA Changes Release 2 project, fulfilling the business need to implement a Foreign Address construct for a Patient's Permanent, Temporary, and Confidential addresses. a. CAPRI has been enhanced to support foreign addresses. The following dialog boxes and tabs have been modified with the addition of fields for Country, Province, and Postal Code: - Enter New Patient * Three new fields have been added to the address section: Country Province Postal Code * The new Country field containing a dropdown list of all available countries has been added. The Country field defaults to UNITED STATES. The Country field controls the display of the Zip+4, County, State, Province, and Postal Code fields. When the selected country is "UNITED STATES", CAPRI displays the Zip+4, County, and State fields and hides the Province and Postal Code fields. When the selected Country is other than "UNITED STATES", CAPRI displays the Province and Postal Code fields and hides the Zip+4, County, and State fields. * The Zip+4 field has been modified to automatically populate the City, County, and State fields when a valid value is entered. In the case that more than one city may correspond to a Zip code, the preferred city populates the City field and the alternate cities populate the City field dropdown list. * The City, County, and State fields have been modified to prevent free text entry for UNITED STATES addresses unless the user possesses the "EAS GMT COUNTY EDIT" Security Key. - Address Verification * Country, Province, and Postal Code fields have been added to the Permanent Address and Temporary Address section. * When the Country field displays "UNITED STATES", CAPRI displays the State, Zip+4, and County fields and hides the Province and Postal Code fields. When the selected country is other than "UNITED STATES", CAPRI displays the Province and Postal Code fields and hides the Zip+4, County, and State fields. - Admin tab * Five new fields have been added to the Permanent Address and Temporary Address Info sections: Country Province Postal Code Last Updated Update Site - Compensation and Pension Exam Inquiry * The address section has been modified to display the Country on the line following the City, State, Zip+4. * CAPRI displays "City, State, Zip+4:" when the country is "UNITED STATES". * CAPRI displays "City, Province, Postal Code:" when the country is not "UNITED STATES" b. The AMIE package in VistA has been enhanced to support foreign addresses. - Inquiry for C&P Requests [DVBA C INQUIRY] option. * The address section has been modified to display the Country on the line following the City, State, Zip+4. * "City, State, Zip+4:" displays when the country is "UNITED STATES". * "City, Province, Postal Code:" displays when the country is not "UNITED STATES". 4. Restore Local Bi-Directional Health Information Exchange (BHIE) Connectivity and Fix Verify Code Change problem a. The Broker Security Enhancement (BSE) implementation in the previously released CAPRI GUI (DVBA*2.7*140) required the disabling of the CAPRI 'DOD tab' to prevent direct access from CAPRI to the Federal Health Information Exchange (FHIE) for CAPRI local users (non-CLAIMS). This patch implements an enhancement to BSE that allows local CAPRI user to connect to a central server and the 'DOD tab' functionality has been restored for local users. b. Internal Software Quality Assurance testing by the CAPRI development team revealed that when the RPCBroker dialog (Change VISTA Verify Code) is utilized to change the user's Verify Code, subsequent silent logins potentially fail. CAPRI has been modified to prevent silent login failures when a user changes their VistA Verify Code using the 'Change VISTA Verify Code' dialog window. 5. Support VA/DoD Disability Evaluation System (DES) Examinations a. In support of the joint VA/DOD Disability Evaluation System (DES) pilot program, 'TRICARE' and 'SHARING AGREEMENT' have been added as available Primary Eligibility selections when entering a new patient. The addition of 'TRICARE' and 'SHARING AGREEMENT' primary eligibilities will allow the DES pilot program office to better identify the number of DES exams performed. - From Patient Selector|Enter New Patient window, CAPRI was modified to add SHARING AGREEMENT as a Primary Eligibility value selectable by a user. - From Patient Selector|Enter New Patient window, CAPRI was modified to add TRICARE as a Primary Eligibility value selectable by a user. - From Patient Selector|Enter New Patient window, CAPRI was modified to add TRICARE as a Patient Type selectable by a user. 6. Disable 'Generate Blank Template' button The 'Generate Blank Template' button on the 'Options:' menu within the C&P Worksheets Module (CPWM) will be disabled and not visible when the 'CAPRI Templates - Standard Objects, Phase 1' patch (DVBA*2.7*142) is installed. This will prevent the creation of badly formatted blank templates, due to the Standard Objects report format modifications exported with patch (DVBA*2.7*142). 7. Technical Enhancement - Control CAPRI Client/Server Version Synchronization The CAPRI GUI client obtains the version of the CAPRI software running on the VistA server by calling the DVBA VERSION remote procedure call (RPC). The RPC derived the server version from hard-coded values in the RPC routine, VERSION^DVBAB1, which required distribution of the RPC routine anytime the server version of CAPRI was modified. Enhancements were made to the RPC routine to obtain the VistA server version of the CAPRI software from CAPRI/AMIE package parameters defined in the PARAMETERS (#8989.5) file. This allows development staff greater flexibility for setting and deriving the CAPRI server version through manipulation of version parameters. 8. Technical Enhancement - Development platform upgrade to Delphi 2006 The development platform for the CAPRI GUI was upgraded for this effort. Previously released versions of the CAPRI GUI had been compiled via Delphi 5 and this version of the CAPRI GUI (v143) has been compiled via Delphi 2006. The technical changes made for this upgrade should not impact the current functionality within CAPRI. IV. Known Anomalies The following section describes the known anomalies within CAPRI GUI v143 and this VistA patch (DVBA*2.7*143). These anomalies will be fixed in the next CAPRI GUI Patch DVBA*2.7*149. 1. Duplex Printer Setting a. The duplex printer setting in the printer properties is ignored. When a printer is set to print on both sides of the paper, the setting is disregarded and the printer will only print on one side of the paper. This issue will be addressed in a future CAPRI GUI patch, at which time the duplex printer property will be honored and the printer will print on both sides of the paper. - Risk/Impact: Low impact to users. - Workaround: Users are still able to print without duplex availability. - Comments: This only affects Veteran's Benefits Administration and not Veteran's Health Administration sites. This anomaly will be fixed in the next CAPRI GUI v149 and VistA patch DVBA*2.7*149. 2. CAPRI Remote Window - Can no longer enter a facility name with a space a. The Health Revenue Center (HRC) reported an issue when attempting to switch facilities within the CAPRI Remote window. When typing in the beginning characters (e.g. "New") of a facility name containing more than one word (e.g. "New York"), CAPRI doesn't recognize the space and next word in the name. Instead, CAPRI defaults to the first facility name in the list that contains the characters entered by the user. For example, if a user attempts to enter the facility "New York", CAPRI defaults to "New Jersey" since "Jersey" precedes "York" alphabetically in the facility list. This issue will be addressed in a future CAPRI GUI patch. - Risk/Impact: Low impact to users. - Workaround: Users are still able access the facility in the facility list by typing the first letter of the site name (e.g. "New") and arrowing or scrolling down to access the facility they would like to select. - Comments: This only affects the Health Revenue Center remote (Claims) users. This anomaly will be fixed in the next CAPRI GUI v149 and VistA patch DVBA*2.7*149. V. TECHNICAL COMPONENTS The following section describes the technical components being exported with this patch. 1. The following record will be added to the REMOTE APPLICATION (#8994.5) file: a. NAME: CAPRIFHIE CONTEXTOPTION: DVBA CAPRI GUI CALLBACKTYPE: STATION-NUMBER CALLBACKPORT: -1 CALLBACKSERVER: XXX Description of change: A new record entry for the REMOTE APPLICATION (#8994.5) file will be created to support Station Number type connections by the Broker Security Enhancement Broker. This entry will be utilized by the CAPRI application when connecting from a local VistA site to the FHIE/BHIE server for DOD data retrieval. 2. The following records will be added to the PARAMETERS (#8989.5) file: a. ENTITY: AUTOMATED MED INFO EXCHANGE PARAMETER: DVBAB CAPRI MINIMUM VERSION INSTANCE: 1 VALUE: CAPRI GUI V2.7*123*0*A b. ENTITY: AUTOMATED MED INFO EXCHANGE PARAMETER: DVBAB CAPRI ALLOW OLD VERSION INSTANCE: 1 VALUE: NO c. ENTITY: AUTOMATED MED INFO EXCHANGE PARAMETER: DVBAB CAPRI HIA UPDATE URL INSTANCE: 1 VALUE: http://vaww.va.gov/hia/Downloads.htm 3. The following records will be added to the PARAMETER DEFINITION (#8989.51) file: a. NAME: DVBAB CAPRI ALLOW OLD VERSION DISPLAY TEXT: Allow old versions of CAPRI to run MULTIPLE VALUED: No VALUE DATA TYPE: yes/no VALUE HELP: Will versions older than the Minimum Version be allowed to run? PRECEDENCE: 1 ENTITY FILE: PACKAGE b. NAME: DVBAB CAPRI HIA UPDATE URL DISPLAY TEXT: HIA URL to obtain CAPRI software update: MULTIPLE VALUED: No VALUE DATA TYPE: free text VALUE HELP: Enter the HIA URL that contains current CAPRI software DESCRIPTION: This parameter contains the full URL that points to the Health Information Access download web site. The web site contains the latest released version of CAPRI. PRECEDENCE: 1 ENTITY FILE: PACKAGE c. NAME: DVBAB CAPRI MINIMUM VERSION DISPLAY TEXT: CAPRI minimum server version MULTIPLE VALUED: No PROHIBIT EDITING: No VALUE DATA TYPE: free text VALUE HELP: This is the current minimum CAPRI GUI version DESCRIPTION: This parameter contains the minimum CAPRI GUI version that is compatible with the server version. Format: CAPRI GUIv2.7*123*1*A*NOOLD PRECEDENCE: 1 ENTITY FILE: PACKAGE 4. The following Remote Procedure Call(s) are being added to the REMOTE PROCEDURE (#8994) file: a. NAME: DVBAB ZIP2CITY TAG: ZIP2CITY ROUTINE: DVBABADR RETURN VALUE TYPE: ARRAY AVAILABILITY: SUBSCRIPTION DESCRIPTION: The remote procedure returns a list containing city, county, and state for a given ZIP code. Results format: Result(0)=ResultCount_"^"_ErrorMsg Result(1..n)=City_"^"_County_"^"_State INPUT PARAMETER: DVBZIP PARAMETER TYPE: LITERAL MAXIMUM DATA LENGTH: 12 REQUIRED: YES SEQUENCE NUMBER: 1 DESCRIPTION: ZIP code value in ZIP+4 format. RETURN PARAMETER DESC: RESULT(0)=ResultCount_"^"_ErrorMsg RESULT(1)=City_"^"_County_"^"_State RESULT(n)=City_"^"_County_"^"_State b. NAME: DVBA CHECK PATCH TAG: CHECK ROUTINE: DVBAB1B RETURN VALUE TYPE: SINGLE VALUE AVAILABILITY: SUBSCRIPTION DESCRIPTION: This RPC is a wrapper for the supported $$PATCH^XPDUTL API to determine whether a given patch is installed or not. "1^Patch Is Installed" is returned on success; otherwise "0^Patch Is Not Installed" is returned. INPUT PARAMETER: DVBPATCH PARAMETER TYPE: LITERAL MAXIMUM DATA LENGTH: 20 REQUIRED: YES SEQUENCE NUMBER: 1 DESCRIPTION: This parameter contains the patch designation (ex. DVBA*2.7*142). RETURN PARAMETER DESC: Returns "1^Patch Is Installed" on success; otherwise returns "0^Patch Is Not Installed". 5. The following Option(s) have been modified in the OPTION (#19) file: a. NAME: DVBA CAPRI GUI MENU TEXT: Capri GUI (Broker) TYPE: Broker (Client/Server) DESCRIPTION: This is the 'B' type option used by CAPRI GUI client application. It contains all the RPCs used by the CAPRI GUI application. Description of change: The following RPCs are being added to the option: RPC: DVBAB ZIP2CITY RPC: DVBA CHECK PATCH 6. The following Routine(s) are being added/modified: a. Modify: DVBAB1 Description of change: The code for Remote Procedure DVBAB VERSION is being modified. The existing VERSION entry point has been modified to allow the CAPRI GUI to obtain the current version of the CAPRI software running on the VistA server and whether old versions of the CAPRI GUI are allowed to run using the following parameters defined in the PARAMETERS (#8989.5) file. - PARAMETER: DVBAB CAPRI MINIMUM VERSION - PARAMETER: DVBAB CAPRI ALLOW OLD VERSION b. Modify: DVBAB1B Description of change: Added new CHECK entry point to the routine. CHECK^DVBAB1B uses the supported $$PATCH^XPDUTL API to determine whether a patch is installed or not. The CHECK entry point is called by the new DVBA CHECK PATCH remote procedure. c. Modify: DVBAB70 Description of change: This routine was modified for CAPRI/AMIE enhancements to support foreign addresses. d. Modify: DVBAB84 Description of change: The $$VN function in the routine was modified. This function is used to validate the name of a new patient being entered using CAPRI. The function now validates the patient name, ensuring that it contains at least a 2 character 'last name' followed by a comma and a single character 'first name'. e. Add: DVBABADR Description of change: The following routine is being exported to support the following remote procedure call (RPC): - DVBAB ZIP2CITY f. Modify: DVBCENQ1 Description of change: This routine was modified for CAPRI/AMIE enhancements to support foreign addresses. g. Modify: DVBCUTIL Description of change: This routine was modified for CAPRI/AMIE enhancements to support foreign addresses. h. Modify: DVBABURL Description of change: This URL entry point was modified to allow the return the Health Information Access (HIA) program website (URL) when calling the DVBAB GET URL remote procedure call. VI. SOFTWARE AND DOCUMENTATION RETRIEVAL 1. VistA Patch DVBA*2.7*143 a. The VistA server software is being distributed as a PackMan patch message through the National Patch Module (NPM). The KIDS build for this patch is DVBA*2.7*143. 2. CAPRI GUI v143 Client Software & User Documentation a. The CAPRI GUI v143 client software is being distributed as executable DVBA_27_143_12.exe. The installed executable for this patch is client version 2.7.143.12 with a size of 13,511 KB. The CAPRI GUI v143 client software and documentation for this patch may be retrieved directly using FTP. The preferred method is to FTP the files from: download.vista.med.va.gov This transmits the files from the first available FTP server. Sites may also elect to retrieve software directly from a specific server as follows: OI&T FIELD OFFICE FTP ADDRESS DIRECTORY ----------------- ----------- --------- Albany ftp.fo-albany.med.va.gov [anonymous.software] Hines ftp.fo-hines.med.va.gov [anonymous.software] Salt Lake City ftp.fo-slc.med.va.gov [anonymous.software] The following files will be available: File Name Format Description --------- ------ ----------- DVBA_27_P143_12.ZIP BINARY ZIP archive containing the CAPRI GUI v143 Client Application executable: DVBA_27_143_12.exe DVBA_27_P143_UM.PDF BINARY Updated CAPRI User Manual DVBA_27_P143_RN.PDF BINARY Release Notes The VistA Documentation Library (VDL) web site will also contain the 'Release Notes' and updated 'CAPRI User Manual'. This web site is usually updated within 1-3 days of the patch release date. The VDL web address for CAPRI user documentation is: http://www.va.gov/vdl/application.asp?appid=133 VII. INSTALLATION REQUIREMENTS/NOTES: 1. Users On the System a. This patch (DVBA*2.7*143) may be installed while CAPRI users are still using the previously released version of the CAPRI GUI (i.e. DVBA_27_140.exe). b. Once the installation of this patch has been completed, CAPRI users should be upgraded to the new released version of the CAPRI GUI (DVBA_27_143_12.exe). PLEASE NOTE: ------------ If CAPRI users are not upgraded, any Compensation & Pension Worksheet Module (CPWM) exam templates opened and saved using the new CAPRI GUI v143 (DVBA_27_143_12.exe) will not be backwards compatible with older versions of the CAPRI GUI (i.e. CAPRI GUI v140). Users of older versions of the CAPRI GUI will experience errors when attempting to open CPWM exam templates saved using the new CAPRI GUI v143. c. This patch modifies routines used by the CAPRI GUI application and the Automated Medical Information Exchange (AMIE) package. It should be installed during non-peak hours to minimize disruption to users and to reduce the possibility of errors when the routines are updated. 2. VistA Options a. There are no VistA options to disable while installing this patch. b. This patch exports the Capri GUI (Broker) [DVBA CAPRI GUI] context option. When using the 'Compare Transport Global to Current System' option on the 'Kernel Installation & Distribution System' menu, the compare shows that it is re-adding the existing RPCs currently attached to the option. However, only the following (2) new RPCs are being added: RPC: DVBAB ZIP2CITY RPC: DVBA CHECK PATCH 3. Software Installation Time a. The estimated installation time for VistA patch DVBA*2.7*143 is less than 5 minutes during off peak hours. 4. Required Builds a. The following is a list of REQUIRED builds for this KIDS distribution (DVBA*2.7*143). KIDS will not allow the installation of this patch without their prior installation. Required Builds: ---------------- DVBA*2.7*126 DVBA*2.7*136 DVBA*2.7*140 DVBA*2.7*146 XU*8.0*523 XWB*1.1*53 VIII. INSTALLATION INSTRUCTIONS: 1. Use the INSTALL/CHECK MESSAGE option on the PackMan menu to unload the KIDS distribution included with this message. 2. From the 'Kernel Installation & Distribution System' menu, select the Installation menu. 3. From this menu, you may now elect to use the following options (when prompted for INSTALL NAME, enter DVBA*2.7*143). a. Backup a Transport Global - This option will create a backup message of any routines exported with the patch. It will NOT backup any changes such as DDs or templates. b. Compare Transport Global to Current System - This option will allow you to view all changes that will be made when the patch is installed. It compares all components of the patch (routines, DDs, templates, etc.). c. Verify Checksums in Transport Global - This option will allow you to ensure the integrity of the routines that are in the transport global. d. Print Transport Global - this option will allow you to view the components of the KIDS build. 4. Use the Install Package(s) option and select package DVBA*2.7*143. 5. When prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of Install? NO//', respond NO. 6. When prompted 'Want KIDS to INHIBIT LOGONs during the install? NO//', it is recommended you answer NO. 7. When prompted to 'Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO//', answer NO. 8. If CAPRI GUI users have not already been upgraded to the new version of the CAPRI GUI v143 (DVBA_27_143_12.exe), they should be upgraded as soon as possible upon installation of this patch. 9. NOTE: Pre/Post-init routine DVBA143P is a temporary routine used as part of the pre/post-install process and will be automatically deleted by KIDS after patch installation. However, in some cases Cache doesn't always delete the routine. You may delete it manually if you discover this at your site. IX. TEST SITES The following sites participated in the testing of the CAPRI GUI v143 and DVBA*2.7*143 server software. Test Sites: ---------- * Alexandria, LA VAMC * Greater Los Angeles HCS, West Los Angeles VAMC * Saginaw, MI VAMC * Washington, DC VAMC Routine Information: ==================== The second line of each of these routines now looks like: ;;2.7;AMIE;**[Patch List]**;Apr 10, 1995;Build 4 The checksums below are new checksums, and can be checked with CHECK1^XTSUMBLD. Routine Name: DVBA143P Before: n/a After: B3638369 **143** Routine Name: DVBAB1 Before: B54214482 After: B54842893 **35,37,50,42,53,57,73,104,109, 137,146,143** Routine Name: DVBAB1B Before: B10372670 After: B11312167 **104,143** Routine Name: DVBAB70 Before: B39041842 After: B43310973 **35,42,57,136,143** Routine Name: DVBAB84 Before: B36589482 After: B36589384 **90,137,140,143** Routine Name: DVBABADR Before: n/a After: B1913888 **143** Routine Name: DVBABURL Before: B2101434 After: B2354419 **104,136,143** Routine Name: DVBCENQ1 Before: B24327636 After: B27476723 **17,57,143** Routine Name: DVBCUTIL Before: B27818943 After: B33092099 **17,126,143** Routine list of preceding patches: 126, 136, 140, 146 ============================================================================= User Information: Entered By : LOUCK,KEVIN Date Entered : MAR 05, 2009 Completed By: DELACRUZ,KRISTINA Date Completed: APR 30, 2010 Released By : FRANCE,KATHI Date Released : MAY 03, 2010 ============================================================================= Packman Mail Message: ===================== $END TXT