$TXT Created by             at CLN1G1.AAC.DOMAIN.EXT  (KIDS) on Friday, 06/12/20 at 09:41
=============================================================================
Run Date: SEP 09, 2020                     Designation: GMTS*2.7*135
Package : GMTS - HEALTH SUMMARY               Priority: Mandatory
Version : 2.7       SEQ #123                    Status: Released
                  Compliance Date: OCT 10, 2020
=============================================================================

Associated patches: (v)GMTS*2.7*94 <<= must be installed BEFORE `GMTS*2.7*135'
                    (v)GMTS*2.7*131<<= must be installed BEFORE `GMTS*2.7*135'
                    (v)GMTS*2.7*132<<= must be installed BEFORE `GMTS*2.7*135'

Subject: CORRECT DOD RX'S NOT DISPLAYING ON EMLR REPORT

Category: 
  - Routine

Description:
============

 This patch will resolve the following issue:
      
 When users run the Essential Meds List for Review Report (EMLR report) 
 in Computerized Patient Record System (CPRS) (Reports Tab), active Patient
 Medications from the Department of Defense (DoD) do not display on the
 report if the medication does not have an Expiration Date.
       
          
 Additional Information:
 -----------------------
    
 Patient Safety Issue (PSI):
 HITPS-6770
            
 Defect Tracking System Ticket(s) & Overview:
      
 1.  INC10337159 Essential Med List For Review (EMLR) Not Pulling 
 in all DoD Prescriptions
      
 Problem:
 --------
 When users review the EMLR report in CPRS, some DoD prescriptions are not
 displayed in the report.  DoD prescriptions that are active and have an
 issue date within the last year should display on the report.  If a DoD
 prescription meets the active, issue date criteria but does not contain an
 expiration date, the prescription will not display.  The expiration date
 is not a requirement for display. 
      
 Resolution:
 -----------
 Routines GMTSPST1, GMTSPST4 and GMTSPSTN will be modified to 
 remove the expiration date requirement on DoD prescriptions so they will
 display in the EMLR report. 
      
      
 Test Sites:
 -----------
 St. Cloud HCS (St. Cloud, MN)
 Loma Linda HCS (Loma Linda, CA)      
      
 Software and Documentation Retrieval Instructions:
 --------------------------------------------------
 The software for this patch is being released in a PackMan message.
     
       
 Patch Installation:
 -------------------     
 Pre-Installation Instructions:
      
 This patch may be installed with users on the system although it is
 recommended that it be installed during non-peak hours to minimize
 potential disruption to users.  This patch should take less than 5 
 minutes to install.
               
 Installation Instructions:  
                
 1.  Choose the PackMan message containing this build. Then select 
     the INSTALL/CHECK MESSAGE PackMan option to load the build.
      
       
 2.  From the Kernel Installation and Distribution System Menu, 
     select the Installation Menu.  From this menu, 
      
     A.  Select the Verify Checksums in Transport Global 
         option to confirm the integrity of the routines that 
         are in the transport global. When prompted for the 
         INSTALL NAME enter the patch name. 
         (ex. GMTS*2.7*135)
      
         NOTE: Using <spacebar><enter> will not bring up a 
               Multi-Package build even if it was loaded 
               immediately before this step. It will only 
               bring up the last patch in the build.
       
     B. Select the Backup a Transport Global option to create a 
        backup message of any routines exported with this patch. 
        It will not backup any other changes such as DDs or 
        templates. 
      
     C. You may also elect to use the following options: 
          i.  Print Transport Global - This option will allow 
              you to view the components of the KIDS build.
          ii. Compare Transport Global to Current System - This 
              option will allow you to view all changes that will 
              be made when this patch is installed.  It compares 
              all of the components of this patch, such as 
              routines, DDs, templates, etc.
      
     D. Select the Install Package(s) option and choose the 
        patch to install. 
        
          i.  If prompted 'Want KIDS to Rebuild Menu Trees Upon 
              Completion of Install? NO//', answer NO.
         
      
          ii. When prompted 'Want KIDS to INHIBIT LOGONs during the 
              install? NO//', answer NO.
           
        
          iii.When prompted 'Want to DISABLE Scheduled Options, Menu 
              Options, and Protocols? NO//', answer NO.
             
      
 Post-Installation Instructions:
 None
  
 Back-out/Rollback Strategy:
 ---------------------------
 Back-out will be done only with the concurrence and participation of
 development team and appropriate VA site/region personnel. The decision to
 back-out or rollback software will be a joint decision between development
 team, VA site/region personnel and other appropriate VA personnel.
  
 Prior to installing an updated KIDS package, the site/region should have
 saved a backup of the routines in a mail message using the Backup a
 Transport Global [XPD BACKUP] menu option (this is done at time of
 install). The message containing the backed-up routines can be loaded with
 the "Xtract PackMan" function at the Message Action prompt. The Packman
 function "INSTALL/CHECK MESSAGE" is then used to install the backed up
 routines onto the VistA System. 
  
 The back-out plan is to restore the routines from the backup created.
  
 No data was modified by this patch installation and, therefore, no 
 rollback strategy is required.
  
 Validation of Back-out Procedure:
 ---------------------------------
 The Back-out Procedure can be verified by printing the first 2 lines of
 the routines contained in this patch using the option First Line Routine 
 Print [XU FIRST LINE PRINT]. Once the routines contained in the 
 GMTS*2.7*135 patch have been backed out, the first two lines of the
 routines will no longer contain the designation of this patch in the patch
 list section on line 2.

Routine Information:
====================
The second line of each of these routines now looks like:
 ;;2.7;Health Summary;**[Patch List]**;Oct 20, 1995;Build 2

The checksums below are new checksums, and
 can be checked with CHECK1^XTSUMBLD.

Routine Name: GMTSPST1
    Before:B172628757   After:B173660133  **94,127,131,135**
Routine Name: GMTSPST4
    Before: B17358718   After: B17716999  **94,135**
Routine Name: GMTSPSTN
    Before:B193970062   After:B195058708  **94,127,131,132,135**
 
Routine list of preceding patches: 132

=============================================================================
User Information:
Entered By  :                               Date Entered  : MAY 12, 2020
Completed By:                               Date Completed: SEP 09, 2020
Released By :                               Date Released : SEP 09, 2020
=============================================================================


Packman Mail Message:
=====================

$END TXT