============================================================================= Run Date: NOV 22, 2023 Designation: GMTS*2.7*145 Package : GMTS - HEALTH SUMMARY Priority: Mandatory Version : 2.7 SEQ #132 Status: Released Compliance Date: DEC 22, 2023 ============================================================================= Associated patches: (v)GMTS*2.7*115<<= must be installed BEFORE `GMTS*2.7*145' Subject: ACTIVE/PARK STATUS - ESSENTIAL MED LIST ERROR Category: - Routine Description: ============ This patch addresses the following issues: 1. With the introduction of PARK functionality (CPRS 32B release), and once the Park functionality is enabled, the Health Summary Type of Essential Med List for Review needs to be able to display "Active/Parked" as a status. These changes in Health Summary routines, along with changes in patch PSO*7.0*712, will allow the Essential Med List for Review to be able to display "Active/Parked" when the prescription is in a Parked status. 2. INC18892605: Essential Med List, Non-VA medications instructions print the old directions first and the new directions second. Patch Components: ----------------- Files & Fields Associated: File Name (Number) Field Name (Number) New/Modified/Deleted ------------------ ------------------- -------------------- N/A Forms Associated: Form Name File Number New/Modified/Deleted --------- ----------- -------------------- N/A Mail Groups Associated: Mail Group Name New/Modified/Deleted --------------- -------------------- N/A Options Associated: Option Name Type New/Modified/Deleted ----------- ---- -------------------- N/A Protocols Associated: Protocol Name New/Modified/Deleted ------------- -------------------- N/A Security Keys Associated: Security Key Name ----------------- N/A Templates Associated: Template Name Type File Name (Number) New/Modified/Deleted ------------- ---- ------------------ -------------------- N/A Remote Procedures Associated: Remote Procedure Name New/Modified/Deleted --------------------- -------------------- N/A Parameter Definitions Associated: Parameter Name New/Modified/Deleted -------------- -------------------- N/A Additional Information: ----------------------- New Service Requests (NSRs): N/A Patient Safety Issues (PSIs): N/A Defect Tracking System Ticket(s) & Overview: 1. INC18892605 - CPRS Essential Med List Error Problem: -------- In the Essential Med List for Review (reconciliation), the Non-VA medications that have been changed display the old directions first and the new directions second. Resolution: ----------- Ensure the Essential Med List for Review (reconciliation) displays the new directions first and older directions second. Test Sites: ----------- CENTRAL CALIFORNIA HCS (FRESNO, CA) TOMAH, WI -VAMC (TOMAH, WI) SNOW Change Order #: -------------------- FRESNO: CHG0422736 TOMAH: CHG0422918 Software and Documentation Retrieval Instructions: -------------------------------------------------- The software for this patch is being released using a host file. The host file is available at the following location: /srv/vista/patches/SOFTWARE/GMTS_2_7_145_PSO_7_712.KID Documentation describing the new functionality is included in this release. Documentation can be found on the VA Software Documentation Library at: https://www.domain.ext/vdl/. Documentation can also be obtained at https://download.vista.domain.ext/index.html/SOFTWARE Documentation Title File Name --------------------------------------------------------------------- Health Summary User Manual HSUM_2_7_UM.PDF HSUM_2_7_UM.DOCX Patch Installation: ------------------- Pre/Post Installation Overview: There are no tasks to be performed before the installation of this multi-build. Note that the routines should be backed up to a PackMan message before installing the build. Pre-Installation Instructions: This patch may be installed with users on the system although it is recommended that it be installed during non-peak hours to minimize potential disruption to users. This patch should take less than 5 minutes to install. It is not necessary to disable any options. Installation Instructions: 1. Use the Load a Distribution option contained on the Kernel Installation and Distribution System Menu to load the Host file. When prompted to "Enter a Host File:" enter /srv/vista/patches/SOFTWARE/GMTS_2_7_145_PSO_7_712.KID 2. From the Kernel Installation and Distribution System Menu, select the Installation Menu. From this menu, A. Select the Verify Checksums in Transport Global option to confirm the integrity of the routines that are in the transport global. When prompted for the INSTALL NAME enter the patch or build name. GMTS*2.7*145 NOTE: Using will not bring up a Multi-Package build even if it was loaded immediately before this step. It will only bring up the last patch in the build. B. Select the Backup a Transport Global option to create a backup message. You must use this option and specify what to backup; the entire Build or just Routines. The backup message can be used to restore the routines and components of the build to the pre-patch condition. i. At the Installation option menu, select Backup a Transport Global ii. At the Select INSTALL NAME prompt, enter your build GMTS*2.7*145 iii. When prompted for the following, enter "R" for Routines or "B" for Build. Select one of the following: B Build R Routines Enter response: Build iv. When prompted "Do you wish to secure this message? NO//", press and take the default response of "NO". v. When prompted with, "Send mail to: Last name, First Name", press to take default recipient. Add any additional recipients. vi. When prompted with "Select basket to send to: IN//", press and take the default IN mailbox or select a different mailbox. vii. Repeat step ii for each build in the host file. C. You may also elect to use the following options: i. Print Transport Global - This option will allow you to view the components of the KIDS build. ii. Compare Transport Global to Current System - This option will allow you to view all changes that will be made when this patch is installed. It compares all of the components of this patch, such as routines, DDs, templates, etc. D. Select the Install Package(s) option and choose the patch to install. i. If prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of Install? NO//', answer . ii. When prompted 'Want KIDS to INHIBIT LOGONs during the install? NO//', answer . iii. When prompted 'Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO//', answer . Post-Installation section: There are no Post-Installation procedures to complete. Back-Out/Roll Back Plan: ------------------------ Back-out will be done only with the concurrence and participation of development team and appropriate VA site/region personnel. The decision to back-out the software will be a joint decision between development team, VA site and regional personnel, and other appropriate VA personnel. Rollback applies to data only and is not applicable to this multi-build. Prior to installing the KIDS multi-build, the site/region should have saved a backup of the routines in a PackMan message using the Backup a Transport Global [XPD BACKUP] menu option (this is done at time of install). The message containing the backed-up routines can be loaded with the "Xtract PackMan" function at the Message Action prompt. The PackMan function "INSTALL/CHECK MESSAGE" is then used to install the backed-up routines onto the VistA System. Routine Information: ==================== The second line of each of these routines now looks like: ;;2.7;Health Summary;**[Patch List]**;Oct 20, 1995;Build 191 The checksums below are new checksums, and can be checked with CHECK1^XTSUMBLD. Routine Name: GMTSGLOS Before: B14557009 After: B16313733 **94,145** Routine Name: GMTSPST1 Before:B175900548 After:B179370425 **94,127,131,135,115,145** Routine Name: GMTSPSTN Before:B197472246 After:B199393145 **94,127,131,132,135,115,145** Routine list of preceding patches: 115 ============================================================================= User Information: Entered By : Date Entered : DEC 06, 2022 Completed By: Date Completed: NOV 16, 2023 Released By : Date Released : NOV 22, 2023 ============================================================================= Packman Mail Message: ===================== No routines included