$TXT Created by               at CLN1G1.AAC.DOMAIN.EXT  (KIDS) on Thursday, 08/02/18 at 13:30
=============================================================================
Run Date: AUG 30, 2018                     Designation: VPR*1*9
Package : VPR - VIRTUAL PATIENT RECORD        Priority: Mandatory
Version : 1         SEQ #7                      Status: Released
                  Compliance Date: SEP 30, 2018
=============================================================================

Associated patches: (v)VPR*1*1     <<= must be installed BEFORE `VPR*1*9'

Subject: CORRECT MISSING CONTRAST ALLERGY ISSUE

Category: 
  - Routine

Description:
============

 The purpose of this patch is to address an issue with the Contrast Media 
 allergy not properly appearing in the Joint Legacy Viewer (JLV) display.
  
 Patient Safety Issues (PSIs):
 -----------------------------
 PSPO 3743 
  
 Defect Tracking System Ticket(s) & Overview:
 --------------------------------------------
  
 1. INC1583647 - New Virtual Patient Record (VPR) Code review for VPRDGMRA
 - Contrast media allergies not displaying in JLV.
  
 Problem:
 --------
 When a patient had an allergy recorded in the Adverse Reaction Tracking 
 (GMRA) application, it wasn't properly displaying when the patient was 
 viewed in the JLV.
  
 Resolution:
 -----------
 The problem was that the routine that gathered the allergies to send to 
 JLV wasn't appropriately handling a date/time that had seconds. Routine 
 VPRDGMRA was modified to handle seconds.
  
 Test Sites:
 -----------
 DURHAM HCS
 WILMINGTON VAMC
  
 Patch Installation:
  
  
 Pre/Post Installation Overview:
 -------------------------------
 There are no special Pre/Post Installation steps required. 
  
 Pre-Installation Instructions:
 ------------------------------
 This patch may be installed with users on the system although it is 
 recommended that it be installed during non-peak hours to minimize
 potential disruption to users.  This patch should take less than 5 minutes
 to install.
  
  
 Installation Instructions:
 --------------------------
 1. Choose the PackMan message containing this patch.
       
 2. Choose the INSTALL/CHECK MESSAGE PackMan option. 
  
 3. From the Kernel Installation and Distribution System Menu, select the
    Installation Menu.  From this menu, you may elect to use the following
    options. When prompted for the INSTALL NAME enter the patch VPR*1.0*9.
  
    a. Backup a Transport Global - This option will create a backup message
       of any routines exported with this patch. It will not backup any
       other changes such as DDs or templates.
    b. Compare Transport Global to Current System - This option will (allow
       you to view all changes that will be made when this patch is
       installed.  It compares all components of this patch routines, DDs,
       templates, etc.). 
    c. Verify Checksums in Transport Global - This option will allow you to
       ensure the integrity of the routines that are in the transport
       global.
  
 4. From the Installation Menu, select the Install Package(s) option and
    choose the patch to install.
  
 5. When prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of 
    Install? NO//' respond NO. 
  
 6. When prompted 'Want KIDS to INHIBIT LOGONs during the install? NO//' 
    respond NO.
  
 7. When prompted 'Want to DISABLE Scheduled Options, Menu Options, and
    Protocols? NO//' respond NO. 
  
 8. If prompted 'Delay Install (Minutes):  (0 - 60): 0//' respond 0.
  
  
 Post-Installation Instructions:
 -------------------------------
 N/A
  
 Back-out/Rollback Strategy:
 ---------------------------
 In the event of a catastrophic failure, the Facility CIO may make the 
 decision to back-out the patch.
  
 It is imperative that you have performed a backup of the routines included
 in this patch prior to installation.
  
 The back-out plan is to restore the routines from the backup created.
  
 No data was modified by this patch installation and, therefore, no 
 rollback strategy is required.
  
 To verify the back-out completed successfully, ensure the checksum 
 matches the pre-patch checksum from the patch descriptions.
  
 Routine Information:
 --------------------

Routine Information:
====================
The second line of each of these routines now looks like:
 ;;1.0;VIRTUAL PATIENT RECORD;**[Patch List]**;Sep 01, 2011;Build 3

The checksums below are new checksums, and
 can be checked with CHECK1^XTSUMBLD.

Routine Name: VPRDGMRA
    Before: B22392321   After: B22400572  **1,9**
 
Routine list of preceding patches: 1

=============================================================================
User Information:
Entered By  :                               Date Entered  : JUL 26, 2018
Completed By:                               Date Completed: AUG 29, 2018
Released By :                               Date Released : AUG 30, 2018
=============================================================================


Packman Mail Message:
=====================

$END TXT