$TXT Created by ROWE,KIMBALL at DEVCUR.ISC-SLC.VA.GOV  (KIDS) on THURSDAY, 12/02/99 at 15:07
=============================================================================
Run Date: DEC 06, 1999                     Designation: GMTS*2.7*36
Package : GMTS - HEALTH SUMMARY               Priority: Mandatory
Version : 2.7        SEQ #33                    Status: Released
=============================================================================

Associated patches: (v)GMTS*2.7*7  <<= must be installed BEFORE `GMTS*2.7*36'
                    (v)GMTS*2.7*28 <<= must be installed BEFORE `GMTS*2.7*36'
                    (v)GMTS*2.7*30 <<= must be installed BEFORE `GMTS*2.7*36'

Subject: Oncology/Lab/Ad Hoc

Category: 
  - Routine

Description: 
============

  Oncology Component
  ==================
   
   This is a new component for Health Summary (Oncology, ONC).
   
   This component lists the patient and characteristics of cancer/tumors 
   found and diagnosed.  This includes cancer identification, date of 
   diagnosis, topography, status, histology, grade/differentiation, stage
   of disease at diagnosis, size of tumor, clinical codes (T, N, and M),
   clinical stage group, pathologic codes (T, N, and M), pathologic stage
   group, first course of treatment, non-cancer directed surgery, surgery
   of primary site, radiation, regional dose, radiation treatment volume,
   intent of radiation, radiation completion status, chemotherapy, 
   hormone therapy, immunotherapy, protocol eligibility status and 
   protocol participation.
 
  Lab Component
  =============
 
   Several sites have written TIU objects which use the Lab Component 
   data extraction routine GMTSLRSE.  The variable SEX is being reported
   as undefined at CHSET+10^GMPSLRSE:1.  This variable is required and 
   documented in the routines as required.  Rather than have multiple
   sites re-write the code for their TIU objects, it was simpler to 
   modify the extraction routine to set the variable SEX.
 
  Ad Hoc Component
  ================
 
   The Ad Hoc Health Summary for the GUI does not emulate the Ad Hoc Health
   Summary of List Manager and "roll and scroll."  This patch exports the
   Remote Procedure Calls to build the necessary arrays to have the user
   select Health Summary components/Selected items, so the GUI and "roll and
   scroll" Ad Hoc Health Summaries behave the same.
 
  Edit Type Structure
  ===================
 
   Users can not edit the Health Summary Type Structure using the menu item
   Create/Modify Health Summary Type.  The quit condition of the Health 
   Summary Componet edit loop has been changed to allow for the editing of
   occurrence and time limits.  (NOIS DUR-1199-32534, CHA-1199-32422, and
   FAV-1299-70029)
 
  ROUTINE SUMMARY
  =============== 
 
    Routines Included
  
        Oncology  GMTSONE   Component Driver and Data Extraction
                  GMTSP36   Post-Install (installs component/PDX Segment)
        Lab       GMTSLRSE  Extraction Routine for Selected Lab Component
        Ad Hoc    GMTSADH5  RPCs for CPRS GUI Ad Hoc Health Summary Component
        Other     GMTSLOAD  Minor change to KIDs/HS Post-Install display
                  GMTSRN    Minor change to KIDs/HS Post-Install display
                  GMTSRM1   Change quit condition of edit loop
 
    Checksums
 
        The second line of each of these routines will look like:
 
            <tab>;;2.7;Health Summary;**[PATCH LIST]**;Oct 20, 1995
 
                          Checksums      Checksums     
          Routine Name   Before Patch   After Patch    Patch List (2nd Line)
          ------------------------------------------------------------------
          GMTSP36            <new>        18724036     36
          GMTSADH5           <new>        14052173     36
          GMTSLOAD          5954208        6025262     23,30,36
          GMTSLRSE          3489502        3682622     28,36
          GMTSONE            <new>         8664015     36
          GMTSRM1           8615336        8596525     7,36
          GMTSRN            4546519        5095034     36
 
          NOTE:  GMTSP36 will be deleted upon completion of the patch
                 installation.
 
  INSTALLATION
  =============
    
  This patch can be installed with users on the system.  Installation
  will take less than two minutes.
   
   1.  Use the INSTALL/CHECK MESSAGE option on the PackMan menu.
    
   2.  Review your mapped set to see if any of the routines listed in 
       the ROUTINE SUMMARY section pre-exist in the account and are 
       mapped.  If found, they should be removed from the mapped set
       at this time.
   
   3.  On the KIDS menu, under the INSTALLATION menu, use the
       following options: (when prompted for INSTALL NAME 
       enter GMTS*2.7*36)
  
         Print Transport Global                      optional
         Compare Transport Global to Current System  optional/recommended
         Verify Checksums in Transport Global        optional/recommended
         Backup a Transport Global                   optional/recommended
         Install Package(s)                          required for install
   
   4.  When prompted "Want KIDS to INHIBIT LOGONs during the 
       Install? YES//", respond "NO".
 
   5.  When prompted "Want to DISABLE Scheduled Options,
       Menu Options, and Protocols? YES//", respond "NO".
   
   6.  If routines were unmapped as part of step 2, they
       should be returned to the mapped set once the installation
       has run to completion.
   
   7.  The Post-Install routine GMTSP36 will install the Oncology 
       component in the Health Summary Component file (#142.1), the 
       GMTS HS ADHOC OPTION Heath Summary type (file #142,12) and 
       the PDX Data Segment file #(394.71).
 
   8.  Routine GMTSP36 (Post-Install) is automatically deleted during
       a install by KIDs. 
 

Routine Information:
====================

Routine Name:
  - GMTSONE


Routine Checksum:

Routine Name:
  - GMTSP36


Routine Checksum:

Routine Name:
  - GMTSLOAD


Routine Checksum:

Routine Name:
  - GMTSRN


Routine Checksum:

Routine Name:
  - GMTSLRSE


Routine Checksum:

Routine Name:
  - GMTSADH5


Routine Checksum:

Routine Name:
  - GMTSRM1


Routine Checksum:

=============================================================================
User Information:                               
Entered By  : ROWE,KIMBALL                   Date Entered : SEP 13, 1999
Completed By: SMITH,VAUGHN                  Date Completed: DEC 03, 1999
Released By : SPIVEY,RICHARD J             Date Released : DEC 06, 1999
=============================================================================


Packman Mail Message:
=====================

$END TXT