$TXT Created by MCCORMACK,JOHN at TRAIN.MILWAUKEE.VA.GOV  (KIDS) on WEDNESDAY, 03/22/00 at 15:56
=============================================================================
Run Date: MAR 27, 2000                     Designation: LA*5.2*51
Package : LA - AUTOMATED LAB INSTRUMENTS     Priority: Mandatory
Version : 5.2        SEQ #34                    Status: Released
=============================================================================

Associated patches: (v)LA*5.2*27   <<= must be installed BEFORE `LA*5.2*51'
                    (v)LA*5.2*44   <<= must be installed BEFORE `LA*5.2*51'
                    (v)HL*1.6*57   <<= must be installed BEFORE `LA*5.2*51'

Subject: LAB LEDI PROTOCOL FILE FIXES

Category: 
  - Routine
  - Enhancement (Mandatory)
  - Other

Description: 
============

 VISTA Laboratory Package patch LA*5.2*51 contains no changes to software
 controlled by VHA DIRECTIVE 99-053, titled VISTA BLOOD BANK SOFTWARE.
  
  
 NOTE: PATCH HL*1.6*57 MUST BE INSTALLED PRIOR TO INSTALLATION OF THIS PATCH.
       LA*5.2*51 SHOULD BE INSTALLED IMMEDIATELY FOLLOWING INSTALLATION OF
       PATCH HL*1.6*57 TO AVOID INTERRUPTION OF LABORATORY ELECTRONIC DATA
       INTERCHANGE (LEDI) HL7 MESSAGE TRANSMISSION.
  
  
 With the release of patch HL*1.6*57 several changes need to be made to the
 Lab LEDI Setup [LA7V SETUP] option. Patch LA*5.2*51 will make the following
 changes to allow Lab LEDI HL7 interfaces to continue to function.
  
  1. The patch removes references to HL LOWER LEVEL PROTOCOL PARAMETER file
     (#869.2) by the LEDI Setup [LA7V SETUP] option.
  
  2. The post-install deletes entries with the LA7V* namespace from the
     HL LOWER LEVEL PROTOCOL PARAMETER file (#869.2). This file is no longer
     used by the Health Level Seven (HL) software to store communication
     parameters. This data has been moved to the HL LOGICAL LINK file (#870)
     by patch HL*1.6*57.
  
  3. The post-install changes the name of protocol LA7V Order from xxx to
     LA7V Order to xxx in the PROTOCOL file (#101), where xxx is the VA
     station number that an order message (ORM) is being sent to.
     The protocol was incorrectly named which could be confusing.
  
  4. The post-install deletes protocols that were previously setup by the
     LEDI Setup option but which are presently not being used.
     If protocols are found with the following names they will be deleted:
      LA7V Query Response to xxx
      LA7V Query for Results from xxx
      LA7V Receive Query from xxx
      LA7V Send Query to xxx
      LA7V Send Response to xxx
      LA7V Order Response to xxx
      (where xxx is the VA station number)
  
  5. The post-install converts and updates existing LA7V* protocols to
     conform to the new rules introduced by patch HL*1.6*57.
  
  6. The patch changes the LEDI Setup option to create protocols based on
     the rules implemented with patch HL*1.6*57.
  
  
  
 ASSOCIATED NOIS
 ---------------
   DUB-0300-30697
   MUS-0200-71248
   PRE-0200-61136
  
  
 TEST SITES
 ----------
   Battle Creek VAMC
   Dublin VAMC
   Indianapolis VAMC
   Milwaukee VAMC
   Muskogee VAMC
   Prescott VAMC
   West Palm Beach VAMC
  
  
 ROUTINE SUMMARY
 ===============
  
   The following is a list of routines included in this patch.
   The second line of each routine now looks like:
  
   <tab>;;5.2;AUTOMATED LAB INSTRUMENTS;**[Patch List]**;Sep 27, 1994
  
                     CHECK^XTSUMBLD results
  
                     Checksum       Checksum
    Routine Name     Before Patch   After Patch    Patch List
    ------------     ------------   -----------    ------------
    LA51             N/A            16393090       **51** (Deleted by KIDS)
    LA7VLL           14468424       4967061        **27,51**
    LA7VORM1         20938223       20868841       **27,51**
    LA7VSET          29695063       19562009       **27,51**
    LA7VSET1         19867155       12823333       **27,51**
    LA7VSTP          24725864       6154318        **27,44,51**
  
  
  
 ************************************************************************
  
 Installation Instructions
 =========================
  
   The install time for this patch is less than 5 minutes. This patch
   can be installed with Laboratory users on the system. Recommend
   that the patch be installed during a period of minimum Laboratory
   package activity.
  
   However, the following conditions apply:
  
      - All Lab LEDI (LA7V*) related HL v1.6 LLPs should be shutdown.
        These LLPs are name spaced LA7V* when viewed in the HL package
        Systems Link Monitor [HL MESSAGE MONITOR] option.
  
  
 NOTE: Kernel, MailMan and HL patches must be current on the target system
       to avoid problems loading and/or installing this patch.
  
       Patch installation needs to be coordinated with the Laboratory
       Information Manager (LIM/ADPAC).
  
  
   1.  If any of the above routines are mapped, disable mapping for them.
  
   2.  Use the 'INSTALL/CHECK MESSAGE' option of the PackMan menu.  This
       option will load the KIDS patch onto your system.
  
   3.  The patch has now been loaded into a Transport global on your
       system.  You now need to use KIDS to install the transport global.
  
   4.  On the 'Kernel Installation & Distribution System' Menu (KIDS),
       select the 'Installation' menu.
  
   5.  Use the 'Verify Checksum in Transport Global' option and verify that
       all routines have the correct checksums.
  
   6.  On the KIDS menu, under the 'Installation' menu, use the following
       options:
         Print Transport Global
         Compare Transport Global to Current System
         Backup a Transport Global
  
       If you wish to preserve a copy of the routines exported in this patch
       prior to installation, you should use the 'Backup a Transport Global'
       option at this time.  You may also compare the routines in your
       production account to the routines in the patch by using the 'Compare
       a Transport Global to Current System' option.
  
   7.  Perform the following step if applicable:
  
       All Lab LEDI (LA7V*) related HL v1.6 LLPs should be shutdown.
       Use Start/Stop Links [HL START] option to shutdown these LLPs if
       they are running.
  
   8.  Use the 'Install Package(s)' option under the 'Installation' menu
       and select the package 'LA*5.2*51'.  When prompted 'Want to
       DISABLE Scheduled Options, Menu Options, and Protocols? YES//',
       choose 'YES'.
  
       Disable the LEDI Setup [LA7V LEDI] option by having KIDS mark the
       option 'Out Of Order'.
  
   9.  On a mapped system, rebuild your map set.
  
  10.  Routine LA51 will be deleted after successful patch installation.
  
  
 Post-Installation Instructions:
  
  
 1. Restart any LA7V* LLPs that were shutdown before patch installation.
    Use Start/Stop Links [HL START] option.
  
  
  
 ************************************************************************
  
 Installation example:
  
 Select Installation Option: 6  Install Package(s)
 Select INSTALL NAME:    LA*5.2*51     Loaded from Distribution 3/3/00@14:53:29
      => LA*5.2*51
  
 This Distribution was loaded on Mar 03, 2000@14:53:29 with header of
    LA*5.2*51
    It consisted of the following Install(s):
       LA*5.2*51
 Checking Install for Package LA*5.2*51
 Will first run the Environment Check Routine, LA51
  
  
                         --- Environment Check is Ok ---
  
 Install Questions for LA*5.2*51
  
  
 Want KIDS to Rebuild Menu Trees Upon Completion of Install? YES// NO
  
  
 Want KIDS to INHIBIT LOGONs during the install? YES// NO
 Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES//
  
 Enter options you wish to mark as 'Out Of Order': LA7V SETUP   LEDI Setup
  
 Enter options you wish to mark as 'Out Of Order':
  
 Enter protocols you wish to mark as 'Out Of Order':
  
 Delay Install (Minutes):  (0-60): 0//
  
 Enter the Device you want to print the Install messages.
 You can queue the install by enter a 'Q' at the device prompt.
 Enter a '^' to abort the install.
  
 DEVICE: HOME//   TELNET VIRTUAL
  
  
  Install Started for LA*5.2*51 :
                Mar 03, 2000@15:18:43
  
 Build Distribution Date: Mar 03, 2000
  
  Installing Routines:
                Mar 03, 2000@15:18:44
  
  Running Pre-Install Routine: PRE^LA51
  
                Sending install started alert to mail group G.LMI
  
                           *** Pre install started ***
  
                   --- No actions required for pre install ---
  
                          *** Pre install completed ***
  
  Installing PACKAGE COMPONENTS:
  
  Installing OPTION
                Mar 03, 2000@15:18:46
  
  Running Post-Install Routine: POST^LA51
  
                           *** Post install started ***
  
                       *** Checking PROTOCOL file #101 ***
  
          ***  for incorrectly named protocols LA7V Order from XXX. ***
  
          *** Changing these to LA7V Order to XXX when appropriate. ***
  
                   *** Also deleting unused LA7V protocols. ***
  
                 --- Updated 53 entries in PROTOCOL file #101 ---
  
          *** Checking HL LOWER LEVEL PROTOCOL PARAMETER file #869.2 ***
  
               ***  for LA7V* entries that are no longer used. ***
  
  --- Deleted 9 entries in HL LOWER LEVEL PROTOCOL PARAMETER file #869.2 ---
  
             *** Converting and updating existing LA7V* protocols ***
  
   Updating/converting protocol LA7V Order to 535
  
   Updating/converting protocol LA7V Order to 578
  
   Updating/converting protocol LA7V Order to 607
  
   Updating/converting protocol LA7V Process Order from 535
  
   Updating/converting protocol LA7V Process Order from 556
  
   Updating/converting protocol LA7V Process Order from 578
  
   Updating/converting protocol LA7V Process Order from 585
  
   Updating/converting protocol LA7V Process Order from 607
  
   Updating/converting protocol LA7V Process Order from 676
  
   Updating/converting protocol LA7V Process Order from 695BY
  
   Updating/converting protocol LA7V Process Results from 535
  
   Updating/converting protocol LA7V Process Results from 578
  
   Updating/converting protocol LA7V Process Results from 607
  
   Updating/converting protocol LA7V Receive Order from 556
  
   Updating/converting protocol LA7V Receive Order from 578
  
   Updating/converting protocol LA7V Receive Order from 585
  
   Updating/converting protocol LA7V Receive Order from 607
  
   Updating/converting protocol LA7V Receive Order from 676
  
   Updating/converting protocol LA7V Receive Order from 695BY
  
   Updating/converting protocol LA7V Receive Results from 535
  
   Updating/converting protocol LA7V Receive Results from 578
  
   Updating/converting protocol LA7V Receive Results from 607
  
   Updating/converting protocol LA7V Results Reporting to 556
  
   Updating/converting protocol LA7V Results Reporting to 578
  
   Updating/converting protocol LA7V Results Reporting to 585
  
   Updating/converting protocol LA7V Results Reporting to 607
  
   Updating/converting protocol LA7V Results Reporting to 676
  
   Updating/converting protocol LA7V Results Reporting to 695BY
  
   Updating/converting protocol LA7V Send Order to 535
  
   Updating/converting protocol LA7V Send Order to 578
  
   Updating/converting protocol LA7V Send Order to 607
  
   Updating/converting protocol LA7V Send Results to 535
  
   Updating/converting protocol LA7V Send Results to 556
  
   Updating/converting protocol LA7V Send Results to 578
  
   Updating/converting protocol LA7V Send Results to 585
  
   Updating/converting protocol LA7V Send Results to 607
  
   Updating/converting protocol LA7V Send Results to 676
  
   Updating/converting protocol LA7V Send Results to 695BY
  
    --- Converted and updated 38 LA7V* entries in PROTOCOL file #101 ---
  
                          *** Post install completed ***
  
               Sending install completion alert to mail group G.LMI
  
  Updating Routine file...
  
  Updating KIDS files...
  
  LA*5.2*51 Installed.
                Mar 03, 2000@15:18:53
  
  Install Message sent #18145
  
  
  
 Install Completed

Routine Information:
====================

Routine Name:
  - LA7VLL


Routine Checksum:

Routine Name:
  - LA7VSET


Routine Checksum:

Routine Name:
  - LA7VSTP


Routine Checksum:

Routine Name:
  - LA7VORM1


Routine Checksum:

Routine Name:
  - LA7VSET1


Routine Checksum:

Routine Name:
  - LA51


Routine Checksum:

=============================================================================
User Information:                               
Entered By  : MCCORMACK,JOHN                 Date Entered : DEC 14, 1999
Completed By: DEVLIN,MARK J                Date Completed: MAR 24, 2000
Released By : BELSCHWINDER,MICHAEL          Date Released : MAR 27, 2000
=============================================================================


Packman Mail Message:
=====================

$END TXT