$TXT Created by ACKERMAN,WILLIAM A at DEV.DEV.ISC-CHICAGO.VA.GOV  (KIDS) on FRIDAY, 06/08/01 at 11:48
=============================================================================
Run Date: JUN 14, 2001                     Designation: MC*2.3*33
Package : MC - MEDICINE                        Priority: Mandatory
Version : 2.3        SEQ #31                    Status: Released
=============================================================================

Associated patches: (v)MC*2.3*15   <<= must be installed BEFORE `MC*2.3*33'
                    (v)MC*2.3*27   <<= must be installed BEFORE `MC*2.3*33'

Subject: FIX TO CPRS INTERFACE

Category: 
  - Routine
  - Print Template

Description: 
============

  
 Test Sites:
 ==========
 Long Beach VAMC
 National VistA Support Clin 2
  
 Associated NOIS:
 ===============
 LON-0101-60810   Medicine Procedure not defined correctly
 ISM-0301-20176   <SELECT>BEGIN+4^MCOBHEM ERROR IN MCBPHEM 
  
 1)  NOIS: LON-0101-60810   Medicine Procedure not defined correctly
     This patch addresses a problem that was found by the Long Beach VAMC
     and OIFO-MARTINSBURG.  If Paracentesis procedure is entered using the
     Brief Enter/Edit GI Procedure Option [MCBLGI] and then viewed via the
     CPRS Report tab, the error "<UNDEF> GENERIC+4^MCARPAC" occurs. The
     MCARPS2 routine has been modified to use the Medicine Patient File
     (#690) "AC" cross-reference to find the report, instead of the
     Procedure/Subspecialty file (#697.2).  The new routine, MCARUTL5, will
     reverse validate the entry from the Procedure to the "AC"
     cross-reference to the indicated patient in Medicine Patient File
     (#690). The print template MCNONENDOPARAC has been added to support
     the Paracentesis Procedure entries in File 699.
  
   ROUTINE: MCARP
   Description:
     This routine has been modified to reflect the new print template
     for Paracentesis Procedures that were entered into File 699 instead of
     File 699.5.
  
   ROUTINE: MCARPS2
   Description:
     This routine has been modified to check if the requested 
     file entry from the "AC" cross-reference is the same as the file
     in File 697.2.  If they are different then it will default to the "AC"
     value. 
  
   ROUTINE: MCARUTL5
   Description:
     This routine is a validation routine.  It checks to see if the
     requested procedure entry and patient match. 
  
 2)  NOIS: ISM-0301-20176   <SELECT>BEGIN+4^MCOBHEM ERROR IN MCBPHEM
     This patch also corrects two HEMATOLOGY (#694) print templates. When
     the user selected Brief Hematology Report [MCBPHEM] option to print
     Hematology reports the print template would error out with a
     <$SELECT> if the report was a HEM procedure. Hematology Report
     [MCFPHEM] was updated to display the work correctly as well even
     though it didn't have an error. The print templates are MCARHEMB and
     MCARHEMBRPR. The options are Brief Hematology Report [MCBPHEM] for
     MCARHEMBRPR and Hematology Report [MCFPHEM] for MCARHEMB.
  
   ROUTINE: MCARHP
   Description:
     This routine has been modified to check if a patient had already
     been selected from another source such as CPRS.  If there was a
     patient selected the routine would skip the patient selection
     process.
  
 Routine Summary:
 ===============
  
    Below is a list of routines included in the patch.  The second
    line of each of these routines now looks like:
             <tab>;;2.3;Medicine;**Patch List**;09/13/1996
  
  Routine Name   Before Patch        After Patch        Patch List
  ------------   ------------        -----------        ----------
  MCARP            12876925           12857757           6,14,15,
                                                         18,27,33
  MCARHP            9497959            9535361          15,16,19,33
  MCARPS2           8362955            8773586             15,33
  MCARUTL5            NA               2360274               33
  
  Installation Instructions:
  ==========================
   
  1) This patch can be installed with users on the system.
       
     Installation should take less than five minutes.
     These routines are not recommended for mapping.
     
  2) Use the INSTALL/CHECK MESSAGE Option on the PackMan Menu to
     Load the KIDS Transport Distribution Global.
     
  3) From the Kernel Installation and Distribution System (KIDS) menu,
     Select the Installation menu.
      
  4) From the Installation menu you may elect to use the following options
     (When prompted for INSTALL NAME, enter MC*2.3*33):
    
           a.  Compare Transport Global to Current System
           b.  Verify Checksums in Transport Global
           c.  Backup a Transport Global
           d.  Print Transport Global
     
  5) Use the Install Package(s) option and select the Package 'MC*2.3*33'.
     
  6) When prompted 'Want KIDS to INHIBIT LOGONS during the install? YES//'
     answer NO.
      
  7) When prompted 'Want to DISABLE Scheduled Options, Menu Options, and
     Protocols? YES//' answer NO.

Routine Information:
====================

Routine Name:
  - MCARPS2


Routine Checksum:

Routine Name:
  - MCARUTL5


Routine Checksum:

Routine Name:
  - MCARP


Routine Checksum:

Routine Name:
  - MCARHP


Routine Checksum:

=============================================================================
User Information:                               
Entered By  : ACKERMAN,WILLIAM               Date Entered : APR 03, 2001
Completed By: REZNIK,CHARMAINE              Date Completed: JUN 14, 2001
Released By : SCOTT,JEAN M                 Date Released : JUN 14, 2001
=============================================================================


Packman Mail Message:
=====================

$END TXT