============================================================================= Run Date: MAR 01, 2004 Designation: OR*3*187 Package : OR - ORDER ENTRY/RESULTS REPORTING Priority: Mandatory Version : 3 SEQ #191 Status: Released Compliance Date: APR 10, 2004 ============================================================================= Associated patches: (v)SD*5.3*316 <<= must be installed BEFORE `OR*3*187' (v)OR*3*206 <<= must be installed BEFORE `OR*3*187' Subject: CPRS GUI V23 Category: - Routine - Data Dictionary Description: ============ PATCH DESCRIPTION ================= Patch 187 / GUI 23 implements Inpatient Medications for Outpatients, Geriatric Extended Care, and Patient Record Flags, and Women's Health. -- INPATIENT MEDICATION ORDERS FOR OUTPATIENTS (IMO) - In an authorized hospital location providers can now place inpatient medication orders (unit dose orders) on an outpatient. The new orders will be saved as inpatient unit dose orders and processed by inpatient pharmacy. This CPRS function will remain dormant until installation of patches SD*5.3*285 and PSJ*5.0*111. -- NOTES TAB - Double-clicking the "New Note" button, or clicking more than once before the visit or title selection screens appeared, could sometimes result in the problems of multiple notes being edited simultaneously and signed blank notes. These have been corrected by disabling (graying out) the "New Notes" button after the user's initial click. Subsequent clicks are ignored until the button is re-enabled normally by other actions. --NOTES/CONSULTS - On the Notes tab, when beginning a new note, the "unresolved consults" reminder screen was not always being displayed if "Verify Note Titles" was set to FALSE and/or if the user had a default non-consults title. This has been fixed. -- TEMPLATES, TEMPLATE DIALOGS - NOIS: DUR-0903-30815, PUG-0104-51275, NOP-1003-11865 - Hyperlink template fields were fixed to activate the link when it was clicked. Hyperlinks at the element level are fixed in this version. Hyperlinks at the group level will be fixed in v24. - Reworked code that was introduced in GUI 21 which caused a significant degradation in template dialog performance. - If CPRS attempts to timeout while a template dialog is open, the warning message about loss of changes should NOT appear, since it requires a response. This prevents CPRS from shutting down, leaving patient information visible on the screen. This was discovered in testing and has been corrected. -- CLINICAL REMINDERS - The GEC project consists of four Reminder Dialogs that must be filled out to be consider a complete referral. New functionality in this release will evaluate the dialogs and display a message stating which dialogs are not completed for a referral. This functionality will not be seen until PXRM*2.0*2 is released. - A problem was discovered with some reminders reporting that the user does not have an active Person Class. This caused the reminder dialog to go into an infinite loop requiring a kill of CPRS through Window Task Manager. The problem was only manifested when trying to evaluate reminders for an addendum. This behavior was caused by the parent note having a bad Episode Begin Date. In GUI 23, if the reminder receives a bad encounter date from the progress note the user will be prompted with a warning message advising them to contact IRM to fix the parent Episode Begin Date. The user will not be able to process the reminder since it will not know what encounter date to use for storage of the encounter data. - A problem with the PCE Primary Diagnosis designation being incorrectly assigned (or not assigned at all) when processing reminders was corrected. - Reminder dialogs were updated to save the window size/position between dialogs/CPRS sessions. -- PATIENT RECORD FLAGS - NOIS: PUG-0903-52299 - When a user selected the same PRF patient several times in a single CPRS session, a MUMPS error was generated and sometimes the user could see the duplicated patient record flag. This has been fixed. -- WINDOWS MESSAGING - NOIS: ANN-0102-42499, POR-0302-51449, NJH-0402-20654, HUN-0602-21532, SFC-1202-61344, HWH-0203-41237, AMA-0403-71729, SLC-0603-51011, ECH-0603-51641 - Many sites have reported that CPRS sometimes hangs between the time of logon and the time the patient selection screen appears. The user's only recourse is to kill CPRS and try again. This is caused by misbehavior of low-level Windows messaging occurring between CPRS and other desktop applications. A fix for this issue has undergone preliminary testing by both CPRS and VistA Imaging developers, but needs to be tested thoroughly in this release. First, sites running VistA Imaging in conjunction with CPRS should insure that no loss of functionality has occurred as a result of this change. And CPRS and Imaging should continue to remain synchronized as always when Imaging is started via the CPRS Tools menu. Second, sites experiencing the aptly named "gray screen of death" should determine whether this fix provides a solution to that problem. - A previous fix to the "grey screen of death" issue that was included in earlier test versions now also includes a performance enhancement (also originally slated for GUI V24). WE REALLY NEED SOME VISTA IMAGING SITES TO THOROUGHLY TEST PATIENT AND DOCUMENT SYNCHRONIZATION WITH CPRS TO ENSURE THAT THIS STILL FUNCTIONS AS IT HAS PREVIOUSLY WHEN STARTING IMAGING FROM THE CPRS TOOLS MENU. -- PROVIDER/USER SELECTION The following E3R's and NOIS relate to Provider/User display and selection when duplicate names exist: E3R's - 14259 15178 15847 17043 17555 17743 NOIS - ATG-0701-32085 HAM-1100-20360 PUG-1001-52064 FAV-0803-70870 BRX-1003-11098 LEX-0302-40449 The above all reported various versions of a desire to eliminate RDV Remote Data Views) users from provider/user selection lists, and difficulty with identifying the correct provider or user when selecting same for an Encounter, as signer/co-signer of a Note, and similar situations in the GUI. As a result, the GUI has been updated so that the following occurs: 1 - When names are displayed, the user's Title is included (if any). 2 - When more than one user exists with the same first and last names, the following results: A - When names are displayed, the Service/Section is also shown. B - When names are displayed, the Division is also shown, depending on whether the application can determine a valid division entry to display (see item C, next). C - Division data display follows these rules: i - No division is displayed if not a multi-divisional site. ii - If multi-divisional and no division listed, no division is displayed. iii - If only one division is listed, it is also displayed. iv - If more than one division is listed and one is marked as "Default" then it is displayed. v - If more than one division is listed and none is marked "Default" then no Division information is displayed. 3 - Users who are "VISITORS" in the NEW PERSON file as a result of entries created there in connection with RDV (Remote Data Views) are screened from the selection lists. 4 - Terminated users are screened from the selection lists. -- ENCOUNTERS, VISIT SELECTION - A circumstance was discovered where the encounter date/time being passed to TIU on document creation was "-1". The validation logic in the Visit Selection screen has been tightened to prevent this from happening. Additionally, if this should occur when beginning a new document or entering a new order for a patient, the user will be asked to re-select a visit as if none currently exists. This will ensure that the correct visit information is filed with these items. - When selecting a visit location for a new visit for an outpatient, hospital locations of type "WARD" will no longer be included in the list. Selection of these locations was causing a variety of problems downstream, and was not consistent with List Manager selection options. Selection of existing visits and existing admissions remains unchanged. -- ORDERS - NOIS: LEX-0302-40065, FGH-0202-32201 - When a patient has been checked into an outpatient location, such as ER, a clinician can order certain inpatient medications (injectables for IV's). If a clinician is writing orders on a patient and the patient is admitted by an appropriate person during that same time frame, the ordering location is not changed until the clinician signs the orders (a pop-up box actually appears and tells the clinician that there is now a new patient location and should the orders to print to it?). If this scenario occurs, the medication shows as an inpatient med on the meds tab but as an outpatient med on the orders tab. This has been fixed. The medication will now show as an inpatient med on both the Meds and Orders tabs. - NOIS: SUX-0103-42340 - CPRS users with no OR or PROVIDER keys are unable to sign a new note when using the File | Review/Sign Changes option. A change in this version will allow no-key users to sign the selected notes. - NOIS: BEC-0103-22364 - For an IV quick order with VERIFY and AUTO-ACCEPT set to YES, on the verify window the provider comment did not display because of the length limitation of 40 characters. This has been fixed. - NOIS: HIN-0503-41731 - If a nurse DC'd an order, made it "Hold until Signed" and then left CPRS, and a pharmacist meanwhile finished the original order via the backdoor with a service correction change, when the nurse returned to CPRS and tried to release the DC'd order to service, a confusing message appeared without indicating that the order had already been finished and activated by pharmacy. This has been remedied. - NOIS: MAN-0403-12285 - For an outpatient, when copying previously DC'd inpatient medication orders for immediately release, the new orders show as inpatient med orders on the Meds Tab and as outpatient med orders on the Orders tab. This has been fixed. Such orders will now show as outpatient med orders on both tabs. - NOIS: AMA-0403-71198 - For a CPRS user lacking authorization to write medication orders, when the user selected med orders for copy/transfer for a delayed event on the Meds Tab, after creating the event default order the Copy/Transfer process was terminated because the user was not authorized to write med orders and the previously created event default order got canceled automatically. This has been fixed. - NOIS WPB-0798-30276: In this version, CPRS allows user to change the refills and pickup for an unreleased unsigned renewal order. - NOIS HIN-0803-41027: For a discharge event, when copying an inpatient medication order to an outpatient medication order, the order dialog presented was the inpatient medication order dialog instead of the outpatient dialog. This has been fixed. - NOIS: HEH-1103-40959 - The PREGNANT box in the radiology order dialog box was not a mandatory check box for female patients and that could potentially cause a patient safety issue. This has been updated. For a female patient the check for pregnancy field MUST be entered before a radiology order will be accepted. - NOIS: DUR-1003-31180 - For an event delayed order, if a quick order is created with "verify" yes and "auto accept" no, the order dialog window will not display. Instead there is now a "verify" window displayed with accept, edit or cancel choices. Additionally, even if quick order did not have a dosage predefined it could still be placed with no dosage. This has been fixed. - NOIS STX-0203-70826; MAC-1103-61285; UNY-1003-11396 LR LAB COLLECT FUTURE no longer working in GUI, but does in Listman. NOIS reports that this stopped working in v20. It now works again. - NOIS: TUA-0104-31320 - When changing an unsigned, unreleased inpatient renewed medication order, the new order did not get updated correctly on the MEDS tab. This has been fixed. CPRS now does not allow users to change unreleased or pending renewal inpatient medication orders. - NOIS: MAD-0903-41330 - Upon selecting outpatient pharmacy orders from the "copy active orders for selected event" for a delayed admission, the orders will now present the ordering dialog. The user must then enter a medication route before the order will be accepted. -- MEDS ORDERS - User sizing of the medication order dialog was not honored cross sessions. This has been fixed. - NOIS: CHA-0603-31953, BAY-0903-30560 - Due to allocation errors reported by sites the ORCH CONTEXT MEDS date range function for displaying active medication orders on Meds tab was disabled. This functionality will be returned in a subsequent release. -- 508 ISSUES - The new JAWS scripts allow the auto-completion features of combo boxes throughout CPRS to work without interfering with how JAWS speaks. - The new JAWS scripts now let JAWS read the title for the Vitals listbox on the cover sheet. - In an inadvertent change to version 22, the Problem Editor screen stopped filling up available room in the problem tab. This has been fixed. - New JAWS scripts fix several control labels that were either mispronounced or not spoken: Proc and Consult Orders now speak Provisional Diagnosis and Reason for Request correctly. The Allergies box in Patient Postings dialog was fixed. - JAWS text for the reminders button on the main toolbar now reflects the icon or animation that is displayed there. - Several edit fields were adding tab characters to text when or were used to navigate out of them. This has been fixed in the following: Proc and Consult Orders, Proc and Consult Editors, Template Editor. - Graphics have been labeled in JAWS for the Notes and Consult tree views, the Template Editor dialog, and the info box in order dialogs. - JAWS now speaks the value of the Then/And pop-up button on the complex orders screen, rather than the less-useful title. -The Refill dialog was having sizing problems with large fonts, and also was not canceling out of form when was pressed. These problems have been fixed. - In the Orders dialog, with font sizes 10 or greater, the OK or Cancel buttons were invisible in the order renewal dialog box. This has been fixed. -- CLINICAL CONTEXT MANAGEMENT (CCOW) - If a user had preferences set to use the last tab on a change of patient, this preference was not always being respected, especially on a patient change induced via CCOW in another application. This has been corrected. -- PATIENT SELECTION -The selection of patients based on appointments at one or more clinics, has been modified to utilize new replacement Scheduling API's to allow for smooth changeover when scheduling data moves to COTS software and data storage. This change is behind-the-scenes; there should be small visible change to users, with the exception that hovering the mouse over a patient name will display the full line, at the end of which the user will see one of three entries indicative of the status of the patient involved: - Ipt Inpatient - Opt Outpatient - < blank > < not determinable > - When patients were selected from a clinic, whether set as the "Default" for patient selection or not, the Encounter data was not holding when different patients were selected. This was fixed. An unreported but similar problem where the Encounter data was not updated when the same patient was on a list (such as appointments in two different clinics), and then selected twice, was also fixed. - E3Rs: #17825, #18461 - When two patients with the same names and last 4 digits of the SSN are selected a dialogue box appears and requires the user to select the correct patient from the list. The original labeling of this dialogue box was "Duplicate Patients" and the label was subsequently changed to read "Similar Patients" instead, per the second E3R listed. - When a Clinic was set as the default source for patient selection and a patient was selected by means of the "Last5" functionality - i.e., by entering the last 4 digits of the SSN or an initial with the last 4 SSN digits - the encounter information was not refreshing on the encounter panel across the top of the cover sheet with the inpatient data (as it used to do). This has been fixed. Note that other changes in this patch now re-set the encounter panel data whenever a patient is selected even if the patient is on the list more than once or twice: a patient might be on the list with one or more appointments, on the list in a Ward as well in a "combination" list that shows clinics and that ward, and then also as a patient in the bottom part of the box where "all" patients are shown. With the new functionality, the patient's encounter data is updated from wherever his or her name might be selected on that list, so that if selected from the clinic listing the clinic visit information should populate, if from a ward, the inpatient data should populate (unless the patient is not an inpatient, in which case the common "Visit not selected" message will appear), and so forth. - From the Pt. Selection screen, when a user selected a Clinic and then used the "Save Patient List Settings" to make that Clinic the Default Patient Selection setting - and if the user then selected a patient which was NOT listed for that default clinic, then the information for that default clinic that was just set would appear anyway as the Encounter location. This bug should now be fixed. -- COVER SHEET, ENCOUNTER PANEL - Encounter locations weren't being kept when a Clinic was the default patient selection source. This has been fixed. -- PROBLEMS TAB - NOIS: WAS-1003-20405 - If editing a problem shown as having an inactive code, and selecting a problem via the Lexicon lookup with the same text but a new code, it was impossible to save this change since the new problem was seen as a duplicate of the old. This has been corrected. - NOIS: WAS-1003-20405 - There was a defect when changing a Problem List problem with a currently-inactive code to one resulting in a code of 799.9. This was scheduled for update in GUI V24 but has instead been added to this release. -- RPL (RESTRICTED PATIENT LIST - "READ ONLY") - The "Patient Panel" has been re-activated. "Read Only" users may now click on the panel and it will function. -- CONSULTS/PROCEDURES ORDERING (CSV) - NOIS: HUN-1003-21015 - If a free-text provisional diagnosis were included in a quick order, then when trying to place that quick order, this diagnosis would be flagged as having an inactive ICD code, despite there being no code involved. This has been corrected. -- TIU - Additional Boolean logic was added to the TIU Object Refresh button. This new logic should decrease the number of calls to the RPC "TIU GET LIST OF OBJECTS". -- OPTIONS - Under the "Patient Selection Defaults" menu and selecting clinics for the days of the week, if the selection list exceeded 44 in number, a previously-selected clinic over 44 names down the list would not appear. This has been fixed. --LABS - NOIS: STX-0203-70826, MAC-1103-61285, UNY-1003-11396 - The LR LAB COLLECT FUTURE quit working, evidently beginning with GUI 20. This has been fixed. --DOCUMENTATION - NOIS: BHS-1203-11247 - The "FAQ" section of CPRS GUI "Help" pointed to the wrong location. This has been fixed. PATIENT SAFETY ISSUES RESOLVED BY THIS PATCH: ============================================ - PSI-03-026 / NOIS: HIN-0503-41731 - D/C and Service Correction. - PSI-03-051 / NOIS: BRX-1003-11098 - RDV Users Selection in CPRS GUI. - PSI-03-056 / NOIS: HEH-1103-40959 - Mandatory 'Pregnant' info for Radiology Orders. - PSI-04-004 / NOIS: TUA-0104-31320 - No update sent for renew med changes. - PSI-04-006 / NOIS: ASH-0104-31242 - Meds Auto DC Missing or Invalid Med Route. GLOBALS: ======= A partial change in the data dictionary for the ORDER file [^OR(100,] is included in this patch. (No data is included in the KIDS build.) FM field number 16 [piece 18 of the 0 node], a datetime field, has been added, and is used in connection with IMO orders. REQUIRED BUILDS: =============== OR*3.0*173 SD*5.3*316 Patch SD*5.3*316 includes new Scheduling Pkg APIs that are used in CPRS when retrieving clinic patient/appointment data. NOTE: Internet Explorer 4.0 (IE4) or later is REQUIRED in order for GUI version 23 to run. However IE 5.5 or later with 128-bit encryption is required for PKI functionality. ROUTINE SUMMARY: =============== The following is a list of the routine(s) included in this patch. The second line of each of these routine(s) will look like: ;;3.0;ORDER ENTRY/RESULTS REPORTING;**[patch list]**;Dec 17, 1997 CHECK^XTSUMBLD results Routine name Before Patch After Patch Patch List ============ ============ =========== ========== ORCACT01 26009616 26091798 94,116,134,141,163,187 ORCSAVE 18448547 18594801 7,56,70,73,92,94,116,141, 163,187 ORCSAVE1 10820707 10854007 92,132,141,163,187 ORCSEND1 18906819 18869936 4,29,45,61,79,94,116,138, 158,149,187 ORIMO N/A 256112 187 ORM 7008548 7153955 3,97,141,187 ORMBLD 12312343 13210220 3,33,26,45,79,97,133,168, 187 ORPRF 3324531 3327808 173,187 ORQPTQ2 11918714 13402319 9,10,85,187 ORQPTQ5 13345385 13989619 82,85,187 ORQPTQ6 10065995 10462108 82,85,187 ORQQPX 9458812 9622981 10,85,184,187 ORQQPXRM 2426793 3233033 10,85,116,173,187 ORWDFH 9606998 10443161 10,92,141,187 ORWDPS3 7427744 7482309 85,94,116,132,187 ORWDPS4 3553814 4274612 116,125,131,141,173,187 ORWDX 15782393 15233861 10,85,125,131,132,141,164, 178,187 ORWDX1 2090668 2551170 85,187 ORWDXA 16360538 16423771 10,85,116,132,148,141,149, 187 ORWDXM1 17158918 17354181 10,85,131,132,141,178,185, 187 ORWDXM2 15200532 15194086 10,85,109,116,132,158,187 ORWDXM3 8781289 9028195 10,85,131,132,141,185,187 ORWDXR 8455080 8682843 10,85,125,131,134,141,149, 187 ORWDXR01 N/A 2835842 187 ORWOR 7975190 8482467 10,85,132,141,163,187 ORWPCE1 12192572 12650129 10,85,116,132,148,187 ORWPT 10544919 10544919 10,85,149,206,187 ORWTPN 8146714 9103027 85,149,187 ORWU 12885276 12826065 10,85,132,148,149,187 ORWU1 6108880 8849990 149,187 ORY187 N/A 1635516 187 NOTE: When running an XINDEX on routines included in this patch, the following errors and warnings may be generated: ORQQPXRM GECP+1 F - Reference to routine '^PXRMGECU'. That isn't in this UCI. GEC+1 F - Reference to routine '^PXRMGECU'. That isn't in this UCI. GECF+1 F - Reference to routine '^PXRMGECU'. That isn't in this UCI. F - Call to this MISSING LABEL WH^PXRMRPCC WHREPORT+1 F - Reference to routine '^WVALERTF'. That isn't in this UCI. WHLETTER+1 F - Reference to routine '^WVRPCNO1'. That isn't in this UCI. ORIMO IMOLOC+9 F - Reference to routine '^SDAMA203'. That isn't in this UCI. IMOLOC+7 F - Reference to routine '^SDAMA203'. That isn't in this UCI. ORWPT LEGACY+3 F - Reference to routine '^A7RDPAGU'. That isn't in this UCI. The software includes logic that will avoid calling PXRMGECU and WH^PXRMRPCC until Clinical Reminders version 2.0 is installed at the site; it avoids calling routines WVALERTF and WVRPCNO1 until patch WV*1*16 is installed at the site; and it avoids calling routine SDAMA203 until patch SD*5.3*285 is installed at the site. INSTALLATION FILES: ================== The following software and documentation files, including the last file which contains Delphi source code, are exported as part of this patch: File Name Contents Retrieval Format --------- -------- ---------------- OR_30_187.KID KIDS Build ASCII OR_30_187.ZIP File(s) indented below BINARY - CPRSCHART.EXE CPRS Executable - CPRS.CNT CPRS Help CNT File - CPRS.HLP CPRS Help File - CPRSGUITM.DOC CPRS GUI Technical Manual (Word Version) - CPRSGUITM.PDF CPRS GUI Technical Manual - CPRSGUIUM.DOC CPRS GUI User Manual (Word Version) - CPRSGUIUM.PDF CPRS GUI User Manual - CPRSLMTM.DOC CPRS LM Technical Manual (Word Version) - CPRSLMTM.PDF CPRS LM Technical Manual - OR_30_187_RN.DOC CPRS GUI V23 Release Notes (Word Version) - OR_30_187_RN.PDF CPRS GUI V23 Release Notes - JAWS_Scripts_187Vxx.ZIP JAWS Support Script Files *OR_30_187_SRC.ZIP CPRSChart Source BINARY *(This file contains, in the CPRS-Chart folder, a "README.TXT" file of major importance to sites utilizing the Delphi source code.) The "JAWS_Scripts_xxxVxx.ZIP" file contains configuration files that replace the file in "informational" patch OR*3.0*126. These configuration files will need to be copied to the \SETTINGS\ENU\ file on all workstations using JAWS. JAWS power users will likely want to install and customize these files themselves. The files listed above may be obtained via FTP. The preferred method is to FTP the files from: download.vista.med.va.gov This transmits the files from the first available FTP server. Sites may also elect to retrieve software directly from a specific server as follows: CIO FIELD OFFICE FTP ADDRESS DIRECTORY ---------------- ------------------------- -------------------- Albany ftp.fo-albany.med.va.gov [anonymous.software] Hines ftp.fo-hines.med.va.gov [anonymous.software] Salt Lake City ftp.fo-slc.med.va.gov [anonymous.software] INSTALLATION INSTRUCTIONS: ========================= Users should not be on the system during installation of this patch. This patch should be installed during non-peak hours to minimize disruption. Installation will take approximately 5 minutes or more, depending on the menu structure at your site. 1. Obtain the file OR_30_187.KID. 2. Review your mapped set. If any of the routines listed in the ROUTINE SUMMARY section are mapped, they should be removed from the mapped set at this time. 3. From the Kernel Installation and Distribution System (KIDS) Menu, select the Installation menu. 4. Use Load a Distribution using OR_30_187.KID when prompted to Enter a Host File name. You may need to prepend a directory name. 5. If given the option to run any Environment Check Routine(s), answer "YES." 6. From this menu, you may then elect to use the following options (when prompted for the INSTALL NAME, enter OR*3.0*187): a. Backup a Transport Global b. Compare Transport Global to Current System c. Verify Checksums in Transport Global 7. When ready, select the Install Packages option (when prompted for the INSTALL NAME, enter OR*3.0*187). 8. When prompted "Want KIDS to Rebuild Menu Trees Upon Completion of Install? Yes//", respond "YES." 9. When prompted 'Want KIDS to INHIBIT LOGONs during the install? YES//', respond "YES." 10. When prompted 'Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES//', respond YES. When prompted to select the options you would like to place out of order, enter the following: OR OE/RR MENU CLINICIAN CPRS Clinician Menu OR OE/RR MENU NURSE CPRS Nurse Menu OR OE/RR MENU WARD CLERK CPRS Ward Clerk Menu OR CPRS GUI CHART 11. When prompted 'Delay Install (Minutes): (0-60): 0//; respond '0.' 12. If routines were unmapped as part of step 2, they should be returned to the mapped set once the installation has run to completion. 13. Following successful installation, the pre/post-install routine ORY187 may be deleted. 14. Retrieve and open the file OR_30_187.ZIP. 15. Place the User and Technical Manual files in a location that can be accessed by CPRS users. 16. Move the CPRSChart.exe and help files to the appropriate directory where they can be accessed by all CPRS workstations. 17. Provide the JAWS support script files to JAWS users. Routine Information: ==================== Routine Name: - ORCSAVE Routine Checksum: Routine Name: - ORCSAVE1 Routine Checksum: Routine Name: - ORIMO Routine Checksum: Routine Name: - ORM Routine Checksum: Routine Name: - ORMBLD Routine Checksum: Routine Name: - ORQQPXRM Routine Checksum: Routine Name: - ORWDFH Routine Checksum: Routine Name: - ORWDPS4 Routine Checksum: Routine Name: - ORWDX Routine Checksum: Routine Name: - ORWDX1 Routine Checksum: Routine Name: - ORWDXM2 Routine Checksum: Routine Name: - ORWDXR Routine Checksum: Routine Name: - ORWOR Routine Checksum: Routine Name: - ORWPCE1 Routine Checksum: Routine Name: - ORY187 Routine Checksum: Routine Name: - ORWU Routine Checksum: Routine Name: - ORWU1 Routine Checksum: Routine Name: - ORCACT01 Routine Checksum: Routine Name: - ORWDXR01 Routine Checksum: Routine Name: - ORQPTQ2 Routine Checksum: Routine Name: - ORWTPN Routine Checksum: Routine Name: - ORCSEND1 Routine Checksum: Routine Name: - ORWPT Routine Checksum: Routine Name: - ORQPTQ5 Routine Checksum: Routine Name: - ORQPTQ6 Routine Checksum: Routine Name: - ORWDXM1 Routine Checksum: Routine Name: - ORWDXM3 Routine Checksum: Routine Name: - ORWDPS3 Routine Checksum: Routine Name: - ORQQPX Routine Checksum: Routine Name: - ORPRF Routine Checksum: Routine Name: - ORWDXA Routine Checksum: ============================================================================= User Information: Entered By : SHARP,PAUL Date Entered : MAY 02, 2003 Completed By: MERRILL,DAVID P Date Completed: FEB 27, 2004 Released By : RIDINGS,SCOTT Date Released : MAR 01, 2004 ============================================================================= Packman Mail Message: ===================== No routines included