$TXT Created by ANWER,MOHAMED at LAWVAA.FO-BIRM.MED.VA.GOV  (KIDS) on Friday, 01/10/03 at 12:21
=============================================================================
Run Date: JAN 29, 2003                     Designation: PSO*7*110
Package : PSO - OUTPATIENT PHARMACY           Priority: Mandatory
Version : 7       SEQ #117                       Status: Released
                  Compliance Date: MAR 03, 2003
=============================================================================

Associated patches: (v)PSO*7*107   <<= must be installed BEFORE `PSO*7*110'

Subject: LABEL PRINTING PROBLEM

Category: 
  - Routine

Description: 
============

 After installing patch PSO*7*107, some sites have reported problems in 
 printing labels, notably when there are bar codes in the label. In patch
 PSO*7*107, we replaced the carriage return control code *13 with $C(13) to
 make it vendor independent. The problem is that the $C(13) under DSM/VMS
 does not initialize the column position to zero. This patch fixes this
 problem.
  
 Please note: This patch and the associated patch PSO*7*107 are not
 compatible with class 3 software for automated dispensing machines such as
 Baker 2000, etc. If your site is using any class 3 software, please get
 the corrections for these dispensing machines before installing this
 patch.
   
          
 Associated E3Rs:
 ================
 N/A
                
      
 Associated NOISs:
 =================                 
 BAY-0702-31682
 JAC-0702-72488
 CIN-0702-42424
 BIR-0702-31935
 MON-0801-52835
 CLL-0702-42892
 CON-0802-10454
 HAM-0902-20607
 LOU-1202-41741        
  
         
 Test Sites:
 ===========
 HUNTINGTON, WV
 BAY PINES, FL     
 ALBUQUERQUE, NM
 SALISBURY, NC
 CINCINNATI, OH
 LEXINGTON, KY
 GREATER LOS ANGELES HCS, CA
   
           
 Routine Summary:
 ================
 The second line now reads as follows:
  
   <TAB>;;7.0;OUTPATIENT PHARMACY;**[patch list]**;DEC 1997
  
 CHECK^XTSUMBLD results:
   
 Routine     Before Patch    After Patch     Patch List
 =======================================================
 PSOLBL1      18347388       18479495        107,110
 PSOLBLN      19303401       19532956        16,36,71,107,110
 PSOLBLN1     25952469       26121809        5,30,71,107,110
 PSOLBLN2     20652534       20689074        92,107,110
 PSOTRLBL     12989554       13041082        19,92,107,110
 PSOSD0       29938665       29971405        2,19,40,66,107,110
 PSOSD1       27352772       27390452        2,17,19,22,40,49,66,107,110
 PSOSD2       17369274       17406954        2,19,107,110
 PSOSD3       13767785       13805465        2,19,107,110
 PSOSDP       23518504       23556184        2,17,19,107,110
   
     
 Installation Instructions:
 ==========================
 Before installing this patch, use the List Tasks [XUTM INQ] option on the 
 Taskman Management [XUTM MGR] menu to list currently running tasks. Do not
 install this patch while Outpatient Pharmacy users are using the software.
 Installation will take no longer than 3 minutes. There are no scheduling
 restrictions or recommendations. 
  
  1. Use the INSTALL/CHECK MESSAGE option on the PackMan menu.
  
  2. Review your mapped set. If the routines are mapped, they should
     be removed from the mapped set at this time.
  
  3. From the Kernel Installation & Distribution System menu, select
     the Installation menu.
  
  4. From this menu, you may select to use the following options:
     (when prompted for INSTALL NAME, enter PSO*7.0*110)
  
    a. Backup a Transport Global - this option will create a backup
       message of any routines exported with the patch. It will NOT
       backup any other changes such as DDs or templates.
  
    b. Compare Transport Global to Current System - this option will
       allow you to view all changes that will be made when the patch
       is installed. It compares all components of the patch (routines,
       DDs, templates, etc.).
  
    c. Verify Checksums in Transport Global - this option will ensure
       the integrity of the routines that are in the transport global.
  
  5. Use the Install Package(s) option and select the package PSO*7.0*110.
  
  6. When Prompted "Want KIDS to INHIBIT LOGONs during the install? YES//"
     respond NO.
  
  7. When Prompted "Want to DISABLE Scheduled Options, Menu Options, and
     Protocols? YES//" respond NO.
  
  8. If Routines were unmapped as part of step 2, they should be returned
     to completion.

Routine Information:
====================

Routine Name:
  - PSOLBL1


Routine Checksum:

Routine Name:
  - PSOLBLN


Routine Checksum:

Routine Name:
  - PSOLBLN1


Routine Checksum:

Routine Name:
  - PSOLBLN2


Routine Checksum:

Routine Name:
  - PSOTRLBL


Routine Checksum:

Routine Name:
  - PSOSD0


Routine Checksum:

Routine Name:
  - PSOSD1


Routine Checksum:

Routine Name:
  - PSOSD2


Routine Checksum:

Routine Name:
  - PSOSD3


Routine Checksum:

Routine Name:
  - PSOSDP


Routine Checksum:

=============================================================================
User Information:                               
Entered By  : ANWER,MOHAMED                  Date Entered : JUL 02, 2002
Completed By: GOYAL,NIHARIKA                Date Completed: JAN 29, 2003
Released By : KIMBLE,BRUCE                  Date Released : JAN 29, 2003
=============================================================================


Packman Mail Message:
=====================

$END TXT