$TXT Created by CEBELINSKI,GREGORY J at DEV.DEV.FO-HINES.MED.VA.GOV  (KIDS) on Monday, 03/03/03 at 09:22
=============================================================================
Run Date: MAR 13, 2003                     Designation: RA*5*40
Package : RA - RADIOLOGY/NUCLEAR MEDICINE     Priority: Mandatory
Version : 5        SEQ #33                      Status: Released
                  Compliance Date: APR 13, 2003
=============================================================================

Associated patches: (v)RA*5*23     <<= must be installed BEFORE `RA*5*40'

Subject: Illegal I/O operation

Category: 
  - Routine

Description: 
============

 When using a commercial off the shelf (COTS) product (Dictaphone, 
 TalkStation, PowerScribe) to manipulate Radiology/Nuclear Medicine 
 reports, there are occasions where M WRITE commands are executed.  Since 
 the process of report manipulation is over a TCP/IP socket, these WRITE 
 commands would cause an illegal I/O operation to occur.
  
 This patch will prevent such errors from occurring in the future.
  
 Related NOIS: CTX-0203-71929
  
 Test Sites
 ==========
 Central Texas
 Greater Los Angeles
 Bronx
  
 Routine Summary
 ===============
 The following routines are included in this patch.  The second line of 
 each of these routines now looks like:
 ;;5.0;Radiology/Nuclear Medicine;**[Patch List]**;Mar 16, 1998
  
                         CHECK^XTSUMBLD results
 Routine         Old              New                Patch List
 --------------------------------------------------------------------------
 RASTREQ         15510248         16746079           **1,10,23,40**
 RASTREQN        9098362          9332338            **40**
  
 Sites should use CHECK^XTSUMBLD to verify checksums.
  
 Installation Instructions
 =========================
  The install time for this patch is less than two minutes.  Since there
  are routine modifications, this patch should be installed when all
  Rad/Nuc Med users are off the system.
  
  Usage of commercial off the shelf products (PowerScribe, TalkStation, and
  Dictaphone) must be suspended while this patch is being installed.
   
  NOTE:  VA MailMan, VA Kernel, VA ToolKit and VA FileMan patches must be
         current on the target system to avoid problems loading and
         installing this patch.
   
  1. If the above routines are mapped, disable mapping for them.
  
     The installation time for this patch should not exceed two minutes.
  
  2. Use the 'INSTALL/CHECK MESSAGE' option of your PackMan menu to load
     the KIDS distribution onto your system.
   
  3. On the 'Kernel Installation & Distribution System' Menu (KIDS), select
     the 'Installation' menu.
   
     From this menu you may choose the following options prior to
     installing this patch:
  
      a. Verify Checksums in Transport Global - this option will allow you
         to ensure the integrity of the routine that is in the transport
         global.
  
      b. Print Transport Global - this option displays the components
         associated with the patch.
  
      c. Compare Transport Global to Current System - this option will
         allow you to view all changes that will be made when the patch is 
         installed.  It compares all components of the patch (routines,
         DDs, templates, etc.)
  
      d. Backup a Transport Global - this option will create a backup
         message of any routines exported with the patch.  It will NOT
         backup any other changes such as data dictionaries or templates.
  
  4. Use the 'Install Package(s)' option under the 'Installation' menu to 
     install the patch.
     
     When prompted for INSTALL NAME, enter: RA*5.0*40.
   
      a. When prompted "Want KIDS to Rebuild Menu Trees Upon Completion
         of Install? //YES", respond NO.
  
      b. When prompted "Want KIDS to INHIBIT LOGONs during the install?
         YES//", respond NO.
   
      c. When prompted 'Want to DISABLE Scheduled Options, Menu Options,
         and Protocols? YES//', respond YES.  When prompted to select the
         options you would like to place out of order, enter the
         following:
  
          RA EXAMEDIT
          RA RPT
   
  5. When prompted 'Delay Install (Minutes):  (0-60): 0//; respond '0'.
  
  6. Verify that the patch installation completed correctly by using the
     KIDS 'Install File Print' under the KIDS 'Utilities' menu option.
  
     At the 'Select INSTALL NAME:' prompt enter 'RA*5.0*40' for patch 
     installation results.
  
  7. On a mapped system, rebuild your map set.

Routine Information:
====================

Routine Name:
  - RASTREQ


Routine Checksum:

Routine Name:
  - RASTREQN


Routine Checksum:

=============================================================================
User Information:                               
Entered By  : CEBELINSKI,GREGORY             Date Entered : MAR 03, 2003
Completed By: PATRICK,PAT                   Date Completed: MAR 12, 2003
Released By : SCOTT,JEAN M                 Date Released : MAR 13, 2003
=============================================================================


Packman Mail Message:
=====================

$END TXT